Abstract:CePO4 materials were prepared via reaction of cerous nitrate with phosphates such as Na3PO4, Na4P2O7, Na5P3O10 and (NH4)(x)H3-xPO4 (x=2, and 3) in aqueous solution, followed by calcination at 550(o)C under the air atmosphere. It was found that the uniform CePO4 indexed to JCPDS NO. 83-0650 was achieved no matter what the phosphates varied in the screened phosphate precursors. However, compared with relative intensity in the standard patterns with R(012)/(120) value of 0.715 (R(012)/(120), Intensity ratio between face (012) and face (120)), some samples obtained from Na4P2O7 and (NH4)(x)H3-xPO4 displayed an enhanced diffraction peak at 2 theta = 31.1(o), which ascribes to plane (012), while others obtained from Na3PO4 and Na5P3O10 were in good agreement with the standard sample (JCPDS NO. 83-0650, CePO4). Correlation between the crystal plane (012) and activity revealed that the enhanced crystal plane favored an enhancement of activity for decarbonylation of lactic acid to acetaldehyde. Effect of aqueous ammonia on catalytic performance of samples was also investigated. It was clearly seen that the sample obtained from Na4P2O7 offered an enhanced activity for decarbonylation of lactic acid as it was treated with aqueous ammonia while others almost remained unchanged or even decreased slightly. XRD patterns for the obtained sample from Na4P2O7 treated with aqueous ammonia disclosed that the diffraction peak at 2 theta = 31.1(o) increased, further demonstrating that crystal face (012) relates to activity of samples for decarbonylation of lactic acid. NH3 (CO2)-Temperature Programmed Desorption experiments suggested that the surface acid-base properties of catalysts related to the ratios of (012)/(120). Varying the catalyst preparation conditions such as calcination temperature and aqueous ammonia can control R(012)/(120) values, thus adjusting acid-base properties of catalysts. Stability experiments show that the catalyst has an acceptable durability, and the activity of the deactivated catalyst can be recovered by a simple calcination at 550 C-o in air.

Synthesis, Characterization, and Catalytic Activity of Uniformly Crystalline Lapo4 Nanofiber Catalysts for Ethanol Dehydration

Structure and Reactivity of Phosphorous Modified H-Zsm-5 Catalysts for Ethanol Dehydration

Electrodeposition of high aspect ratio LaPO 4 and LaPO 4 :Ln 3+ (Ln 3 + =Ce 3+ , Tb 3+ ) nanostructures

Synthesis, Characterization, and Catalytic Activity of Phosphorus Modified H-Zsm-5 Catalysts in Selective Ethanol Dehydration

Au/LaPO4 Nanowires: Synthesis, Characterization, and Catalytic CO Oxidation

Synthesis of Mesoporous Lapo4 Nanostructures with Controllable Morphologies

Synthesis of Surface-Controlled CePO4 and Its Application for Catalyzed Decarbonylation of Lactic Acid to Acetaldehyde

Synthesis of Propylene Carbonate from Alcoholysis of Urea Catalyzed by Modified Hydroxyapatites

Structural and Electronic Characterization of Photo-responsive Lanthanum (III) Complex Incorporated into Electrospun Fibers for Phosphate Ester Catalysis.

Effect of Different LaPO 4 Supports on the Catalytic Performance of Rh 2 O 3 /lapo 4 in N 2 O Decomposition and CO Oxidation

Low-cost Synthesis of Nanoaggregate SAPO-34 and Its Application in the Catalytic Alcoholysis of Furfuryl Alcohol

Selective dehydration of bio-ethanol to ethylene catalyzed by lanthanum-phosphorous-modified HZSM-5: influence of the fusel

Synthesis of SAPO-34 Nanoplates Via Hydrothermal Method

Controlled Synthesis of Lapo4 and Cepo4 Nanorods/Nanowires

SAPO-18 Catalysts and Their Broensted Acid Sites

Defect engineered efficient catalytic transfer hydrogenation of furfural to furfuryl alcohol in ethanol by Co-doped LaMnO3

Synthesis and catalytic performance of wood cellulose nanofibers grafted with polylactic acid in rare-earth complexes based on tetrazole carboxylic acids

Pd-Based Nano-Catalysts Promote Biomass Lignin Conversion into Value-Added Chemicals

Synthesis of a hierarchically porous niobium phosphate monolith by a sol–gel method for fructose dehydration to 5-hydroxymethylfurfural

Carbon coated LaFe0.92Pd0.08O3 composites for catalytic transfer hydrogenation: Balance in the ability of substrates adsorption and conversion

Catalytic performance of the Ce-doped LaCoO3 perovskite nanoparticles