Abstract:The positron source is one of the most important parts of the circular electron–positron collider (CEPC) linear accelerator. The design goal is to obtain a 3 nC bunch charge positron beam from a 4 GeV primary electron beam with an intensity of 10 nC/bunch. In this study, an all-solid-state, high-current pulse power system was developed to drive a flux concentrator to capture positrons by generating a magnetic field with a peak value of 6 T. Based on the inductive load topology circuit, the optimized parameters were designed to generate a pulse current with a high peak value and a high rise rate pulse current. In addition, a non-reverse voltage was realized to protect the solid-state switch components. For the characteristics of the long-distance transmission between the pulse power supply and the load in the system, the influences of the cable distribution parameters on the pulse were analyzed, and the design of the damping circuit was proposed to suppress the high-frequency ripples of the peak pulse current. An optimized coaxial discharge structure was designed to reduce the stray parameters in the main circuit. The design was verified through simulations and experiments, and the results demonstrated that the developed prototype successfully generated an ideal half-sinusoidal pulse current with a peak value of 15 kA, and a front pulsewidth of $2.5 ~\mu \text{s}$ at a repetition rate of 50 Hz. The pulse repetition stability is better than 0.1%. The final output was consistent with the theoretical analysis. The system can be applied in the CEPC positron source, which also provides a reference for the subsequent development of a positron source system at research facilities.

The Slow Positron Beam Based on Beijing Electron-Positron Collider

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

SIMION Simulation of a Slow Pulsed Positron Beam

Simulations of slow positron production using a low energy electron accelerator

Development of a Solid-State, High-Current, Repetitive Pulse Power System for Positron Source Prototype

Single Beam Phenomena in BEPC

High-Speed RF Switch Electronics for Picking Up of Electron–Positron Beam Bunches

A Novel Source of MeV Positron Bunches Driven by Energetic Protons for PAS Application

Concept Design of the BTF Accelerator

A 70mhz Pulsing Beam System for Protons

Design Study of Multi-Charge Low Energy Beams Transport for BISOL Post Accelerator

BEAM DYNAMICS OF THE 13 MeV/50 Ma PROTON LINAC FOR THE COMPACT PULSED HADRON SOURCE AT TSINGHUA UNIVERSITY*

THE PROPOSED EXPERIMENTAL STUDY ON BEAM- PHOTOELECTRON INTERACTIONS IN BEPC

The design and construction of a pulsed beam generation system based on high intensity cyclotron

High-Intensity and High-Brightness Source of Moderated Positrons Using a Brilliant gamma Beam

Driving Positron Beam Acceleration with Coherent Transition Radiation

Beam pulsing system for the 4.5 MV electrostatic accelerator

Experimental Studies on the Photoelectron Instability in the Beijing Electron Positron Collider

Acceleration of laser-driven positron beam in sheath field

Dense polarized positrons from beam-solid interactions

Beam pulsing system for the 4.5MV electrostatic accelerator at Peking Univ