Abstract:The superior fracture toughness of yttria stabilized tetragonal zirconia polycrystals (TZPs) originates from the stress-induced tetragonal to monoclinic (t-m) phase transformation in the tensile stress field around a propagating crack front. However, spontaneous phase transformation can take place when TZPs are exposed to humid environments, which is accompanied by intergranular microcracking and results in the loss of mechanical properties. This phenomenon, usually called low temperature degradation (LTD) or aging, is considered as a main drawback of TZPs for their clinical applications such as femoral heads and dental implants. In order to explore the mechanisms behind transformation induced intergranular microcracking, a coupled phase field model is developed in this paper, which can simulate the t-m phase transformation and intergranular microcracking simultaneously. The phase field model is validated by studying the microcrack nucleation from a single twin variant with a pure shear eigenstrain. The length of the nucleated microcrack obtained with the phase field modelling matches well with the theoretical prediction. The influence of the dilatational eigenstrain on microcrack nucleation and microcrack nucleation from a monoclinic twin are fully discussed. After that, phase field simulations are conducted to study t-m transformation induced intergranular microcracking in polycrystalline tetragonal zirconia ceramics. It is found that the width of the martensitic variants and their incidence angles to the grain boundary have significant influences on microcrack nucleation. The microstructure of the martensitic twins and the distribution of the intergranular microcracks are fully discussed. The results are helpful to understand the degradation mechanisms of TZPs after the hydrothermal aging.

Transformation criterion of phase transformation toughening ceramics with misoriented microcracks

Stiffness and strength of phase transformation ceramics containing misoriented microcracks

The Stiffness and Strength of Transformation Toughening Ceramics with Misoriented Microcracks

The Toughening Action of Comprehensive Transformation on Mixed Mode II-III Ceramics

Evolution of the microcracks in whisker toughening ceramic matrix composites

Correlation between microstructure, phase transformation during fracture and the mechanical properties of Y-TZP ceramics

Transformation Toughening of Al2O3/ZrO2 Laminated Ceramics with Residual Compressive Stress

Modelling of combine toughening in whiskers and transformation combine toughening ceramics

Thermal cracking: clarifying the effects of phases, voids and grains through characterisation and crystal plasticity modelling

Transformation Driving Force for Indentation Cracking in Zirconia Ceramics

Study of Transformation Toughening Behavior of an Edge Through Crack in Zirconia Ceramics with the Cohesive Zone Model

Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy

Modeling of materials capable of solid–solid phase transformation. Application to the analytical solution of the semi-infinite mode III crack problem in a phase-changing solid

Relationship between Surface Compressive Stresses and Transformation Toughening of ZrO2 Laminated Ceramics

Microdamage In Polycrystalline Ceramics Under Dynamic Compression And Tension

Toughening Ceramic-Based Composites by Homogenizing the Lattice Strain at Phase Boundaries.

Study of Transformation Induced Intergranular Microcracking in Tetragonal Zirconia Polycrystals with the Phase Field Method

A thermodynamically-consistent non-isothermal phase-field model for probing evolution of crack propagation and phase transformation

Phase Field Modeling of Crack Propagation in Three-Dimensional Quasi-Brittle Materials under Thermal Shock

Numerical Analysis of Thermal Shock Cracking Behaviors of Ceramics Based on the Force-Heat Equivalence Energy Density Principle

Multiple Toughening Mechanisms of Ceramic Composites Based on X-FEM Method