Abstract:To study the dynamic mechanical properties and failure characteristics of intersecting jointed rock masses with different joint distributions under confining pressure, considering the cross angle α and joint persistence ratio η , a numerical model of the biaxial Hopkinson bar test system was established using the finite element method–discrete-element model coupling method. The validity of the model was verified by comparing and analyzing it in conjunction with laboratory test results. Dynamics-static combined impact tests were conducted on specimens under various conditions to investigate the strength characteristics and patterns of crack initiation and expansion. The study revealed the predominant factors influencing intersecting joints with different angles and penetrations under impact loading. The results show that the peak stress of the specimens decreases first and then increases with the increase of the cross angle. When α < 60°, regardless of the value of η , the dynamic stress of the specimens is controlled by the main joint. When α ≥ 60°, the peak stress borne by the specimens decreases with increasing η . When α < 60°, the initiation and propagation of cracks in the cross-jointed specimens are mainly controlled by the main joint, and the final failure surface of the specimens is composed of the main joint and wing cracks. When α ≥ 60° or η ≥ 0.67, the secondary joint guides the expansion of the wing cracks, and multiple failure surfaces composed of main and secondary joints, wing cracks, and co-planar cracks are formed. Increasing lateral confinement significantly increases the dynamic peak stress able to be borne by the specimens. Under triaxial conditions, the degree of failure of the intersecting jointed specimens is much lower than that under uniaxial and biaxial conditions.

Numerical Simulation of Failure Process of Three-Point Bending Beam under Impact

Numerical simulation of cracking of early-age concrete three-point beams

NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Simulation of Multiscale Time and Space in Fracture Process of Three-Point-Bending Concrete Beam with Offset Notch

Simulating failure behavior of reinforced concrete T-beam under impact loading by using peridynamics

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD

Numerical simulation for the dynamic failure process in brittle materials

EXPERIMENTAL RESEARCH AND NUMERICAL SIMULATION OF 3D MULTI-DIRECTIONAL CRACKING IN RC BEAM

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

Numerical simulation on rock failure under combined static and dynamic loading during SHPB tests

Numerical Simulation of Quasi-Brittle Fracture in UHPFRC I-Beam as a Linear Complementarity Problem

NUMERICAL MODELING FOR COHESIVE FRACTURE OF FRP-CONCRETE BONDED INTERFACES IN THREE-POINT BEND BEAMS

A numerical critical shear crack model and its application to post‐peak behavior assessment of RC and SFRC beams

Three-dimensional Nonlinear Numerical Model for Concrete Fracture Analysis

Experimental and numerical investigation on the mechanical responses and cracking mechanism of 3D confined single-flawed rocks under dynamic loading

Numerical Study of Failure Behaviour of Pre-Cracked Rock Specimens under Conventional Triaxial Compression

Three-dimensional numerical simulation of dynamic strength and failure mode of a rock mass with cross joints

A novel damaged-based numerical manifold method to simulate the failure process of brittle rocks from damage evolution to crack initiation, propagation and coalescence

Parametric analysis of dynamic crack propagation of concrete bending beam based on the extended finite element method