Abstract:It has been long understood that fretting differs from sliding wear in that the relative displacement between the bodies is generally smaller than the size of the contact between them, with debris ejection from the contact thus playing an important role in the behaviour of the contact in fretting. Whilst these ideas were clearly articulated more than 30 years ago via Godet's third-body approach and Berthier's concept of the tribology circuit, calculation of wear rates in fretting have continued to employ Archard's wear equation (or approaches directly derived from it), despite this approach assuming that the rate of wear is controlled by the rate of generation of wear debris (as opposed to the rate of its ejection from the contact). It has been shown recently that when debris ejection is the rate-determining-process in fretting, the instantaneous rate of wear is inversely proportional to a characteristic dimension of the wear scar. When non-conforming specimen pair geometries (such as cylinder-on-flat) are employed in fretting testing, the wear scar size increases as wear proceeds, and thus the instantaneous rate of wear decreases. In this paper, wear equations have been derived for three commonly employed non-conforming pair specimen geometries, which all take the form <math>Vw=KRn−1Edn</math> (<math>Vw</math> is the wear scar volume, <math>R</math> is the radius of the non-plane specimen(s) in the pair and <math>Ed</math> is the frictional energy dissipated) where <math>n</math> varies between 0.67 and 0.8 depending upon the geometry and assumptions made regarding the governing equation. It is argued that the assumptions on which the analysis is based are most valid for the cylinder-on-flat contact configuration with fretting perpendicular to the cylinder axis where the length of the line contact is large compared to the wear scar width. It is demonstrated that, despite the often apparently good fit of experimental data to an Archard-type equation, it is not appropriate to employ such Archard-type approaches to the analysis of fretting data in situations where debris ejection is the rate-determining-process. The equations derived in this paper relating wear scar size to some measure of the duration of the test should be used for such analysis instead of the linear relationships generally employed in previous work.

Description to wear debris boundaries by radar graph fractal method

Historical shear deformation of rock fractures derived from quantitative three-dimensional description of fracture surfaces on digital outcrop models (DOMs)

A Novel Wear Angle Determination Algorithm for Wear Image Based on Direction Correlation of Wear Scar

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

Contact Analysis of Abrasive Wear

Wear state identification using dynamic features of wear debris for on-line purpose

A Wear Depth Characterization Method Based on Fractal Order Taylor Expansion of Measured Normal Displacements

Topography Characterization of Friction Pairs During the Real-Time Wear Process in Dry Condition

Shape classification of wear particles by image boundary analysis using machine learning algorithms

Breakdown of Reye's theory in nanoscale wear

Debris effect on the surface wear and damage evolution of counterpart materials subjected to contact sliding

Contact size and debris ejection in fretting: The inappropriate use of Archard-type analysis of wear data and the development of alternative wear equations for commonly employed non-conforming specimen pair geometries

Modeling Wear State Evolution Using Real-Time Wear Debris Features

Analysis of the Raceway Boundary Using Fractal Theory

A wear debris recognition method based on dual-channel electrostatic signal and prominence of cross-correlation function

Optical interferential method for wear measurement

A FRACTURE-INDUCED ADHESIVE WEAR CRITERION AND ITS APPLICATION TO THE SIMULATION OF WEAR PROCESS OF THE POINT CONTACTS UNDER MIXED LUBRICATION CONDITION

Modeling Analysis of Abrasive Wear

Fractal Analysis of Real Aperture Radar Ocean Image

An Improved Tool Wear Monitoring Method Using Local Image and Fractal Dimension of Workpiece

Wear of a crossing under dynamic wheel impact