Abstract:Polyaniline (PANI) particles were synthesized using aniline (AN), dodecyl benzene sulfonic acid (DBSA), and ammonium persulfate (APS). The particles were analyzed using scanning electron microscope (SEM), X‐ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). A PANI/waterborne polyurethane composite material (PANI‐WPU) was obtained by combining it with polyethylene glycol (PEG600), diphenylmethane diisocyanate (MDI), dimethylol propionic acid (DMPA), N‐methyl pyrrolidone (NMP), and dibutyltin lauric acid (DBTDL). The structure was characterized by the FTIR spectrum. The mechanical characteristics of the coating film were evaluated with respect to the PANI content, as well as its water absorption, glossiness, electrochemical corrosion resistance, and acid and alkali resistance. The PANI/waterborne polyurethane film has a maximum tensile strength of 23 ±1 MPa, an elongation of 1012%, a pencil hardness of 5H, a flexibility of 2 mm, an impact resistance of 50 cm, the water absorption of 14.66%, and the glossiness of 99.9 ±0.1 at 60°. When the PANI content is 0.7%, the mechanical characteristics, glossiness, and anti‐corrosion performance of the composite film improve. The corrosion inhibition efficiency of the aqueous polyurethane coating film with PANI can reach 99.74%, as shown by the examination of electrochemical polarization curves and impedance spectra. The tinplate is coated with a 0.7% PANI‐WPU composite material and edge sealing. This coating provides excellent protection against acid and alkali resistance, as demonstrated by its ability to withstand immersion in 10% H2SO4 and 10% NaOH solution for 90 days without any paint peeling off.

Preparation of Nanocomposite of Polyaniline and Gamma-Zirconium Phosphate (Γ-Zrp) by Power Ultrasonic Irradiation

Sonochemical Preparation of Nanocomposite of Gamma-Zirconium Phosphate (Γ-Zrp) and Cu2O/CuO Embedded Polyaniline

Preparation of ZnO/PANi Composite Nanowire and Their Interactions on Interface between ZnO and PANi

Preparation and Magnetic Properties of Zn-Cu-Cr-La Ferrite and Its Nanocomposites with Polyaniline.

Preparation of polyacrylamide and gamma-zirconium phosphate nanocomposites by intercalative polymerization.

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

The Preparation And Characterization Of Zns/Pmma Nanocomposites

Investigation on Structural, Electrical and Dielectric Properties of Polyaniline/ZrO2 Composite

Synthesis and characterization of PANI-ZrWPO4 nanocomposite: adsorption-reduction efficiency and regeneration potential for Cr(VI) removal

Studies on the preparation and structure of polyacrylamide/α-zirconium phosphate nanocomposites

Preparation and anti‐corrosion performance of nano Polyaniline/Polyurethane interpenetrating network composite coating

Synthesis of Polyacrylamide/α-Zirconium Phosphate Nanocomposite by In-Situ Intercalative Polymerization and the Characterization of Its Structure

Preparation and electrochemical studies of layered PANI/HNb<sub>3</sub>O<sub>8</sub>nanocomposite

Preparation of the PAn/PMMA Conductive Composite by In-Situ Emulsion Polymerization

Fabrication of Conducting Polyaniline‐coated Halloysite Coaxial Structure Nanocomposites Via in Situ Oxidative Graft Polymerization

Organically modification of layered alpha-zirconium phosphate

Preparation of polyaniline/vermiculite clay nanocomposites by in situ chemical oxidative grafting polymerization

Preparation And Electrochemical Studies Of Layered Pani/Hnb3o8 Nanocomposite

Synthesis of composite of ZnO spheres with polyaniline and their microwave absorption properties

Preparation and corrosion resistance of polyaniline and waterborne polyurethane composite coating film

Controlling the Morphology of Micrometre-Size Polystyrene/polyaniline Composite Particles by Swelling–Diffusion–Interfacial-Polymerization Method