Abstract:Abstract Precise tooling is vital for defect-free production of micro injection moulded (μ-IM) or hot-embossed products. The demoulding stage of such moulding and forming processes poses a serious challenge to the integrity of thin miniature features because of friction, adhesion, and thermal stresses. Typically, micro moulds involve geometrically textured patterns or features such as linear ridges, pillars, channels, and holes, the characteristic dimensions of which range from 10 to 300 μm. Realistically complex mould designs, containing precision micro features (enhanced fillet radius and positive draft angle) and high surface quality, are presented in this work. Electropolishing based on forward pulse currents (PC) has been used to shape and polish Ni micro moulds that contain sets of micron-scaled linear ridges and star patterns in order to ease the separation of moulded polymeric parts from the metallic mould during ejection and demoulding. The use of forward pulsed currents improved the mould design by increasing the fillet radii and draft angle while keeping the surface roughness low and maintaining a good surface shine. An optimization study of forward PC using a green solution of nickel sulfamate varied EP times (0–70 min) and duty cycles (40, 50, 60, and 70%) at a process conditions of 2.8 V, 50 °C, and 250 rpm. The best topographical and morphological changes were observed for a typical microfluidic channel ( w × h , 100 × 110 μm) with an EP time of 70 min and 50% duty cycle: fillet radius increased by 3.8 μm, draft angle by 3.3°, and the channel width reduced by 11.4% while surface roughness changed by 8.6% and surface shine improved by 48.9%. Experimental validation was performed using hot embossing wherein the electropolished Ni mould replicated the micro channels and star patterns in PMMA chips with notably fewer burrs, material pile up, and no feature distortion. Moreover, there was a reduction in the side wall roughness of micro channels in PDMS casting with electropolished Ni mould by 16%. Hence, this work presents a significant scientific contribution to improving the efficiency of micro mould tools and reduces the defects caused by friction and adhesion in replicated polymeric parts.

Nickel Electroforming of 3D Microstructure by Using BPR100 Photoresist Mould

Thick Photoresists for Electroforming Metallic Microcomponents

Fabrication of high-aspect-ratio metallic microstructures by microelectroforming using silver-coated polydimethylsiloxane molds with controllable wettability

Chemical Microetching of Three-dimensional Gear-like Pattern on Nickel Surface

Surface Micro-Texturing of Metallic Cylindrical Surface with Proximity Rolling-Exposure Lithography and Electrochemical Micromachining

Fabrication of Ni-Al2o3 Composite Microcomponent by Electroforming

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Electrochemical Deposition of Pure-Nickel Microstructures with Controllable Size

Three-dimensional micro-fabrication on copper and nickel

Microscale shaping and rounding of ridge arrays and star pattern features on nickel mould via electrochemical polishing

Electrochemical Studies Of Electrodeposition Of Nickel For Liga Microstructures

Microelectroforming of freestanding metallic microcomponents using silver-coated poly(dimethylsiloxane) molds

Microtexture fabrication on cylindrical metallic surfaces and its application to a rotor-bearing system

A Profile Shaping and Surface Finishing Process of Micro Electrochemical Machining for Microstructures on Microfluidic Chip Molds

Precision shaping of nickel micro-mould features via electropolishing: Characterisation of electrolytes from strong to weak acids

Fabrication of Micro Structure Using EDM Deposition

High-aspect-ratio three-dimensional polymer and metallic microstructure microfabrication using two-photon polymerization

Sustainable Production of Micro Gears Combining Micro Reciprocated Wire Electrical Discharge Machining and Precision Forging

Fabrication of Large Scale Bi-layer Microstructure through Electrochemical Nanoimprinting

Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects

Novel 3-D Device Fabrication Process in Micro-Electronic Mechanical System Based on Nano-Imprint Lithography