Abstract:Polymerase chain reaction (PCR) is the most common method used for nucleic acid (DNA) amplification. The development of PCR-performing microfluidic reactors (μPCRs) has been of major importance, due to their crucial role in pathogen detection applications in medical diagnostics. Closed loop (CL) is an advantageous type of μPCR, which uses a circular microchannel, thus allowing the DNA sample to pass consecutively through the different temperature zones, in order to accomplish a PCR cycle. CL μPCR offers the main advantages of the traditional continuous-flow μPCR, eliminating at the same time most of the disadvantages associated with the long serpentine microchannel. In this work, the performance of three different CL μPCRs designed for fabrication on a printed circuit board (PCB) was evaluated by a computational study in terms of the residence time in each thermal zone. A 3D heat transfer model was used to calculate the temperature distribution in the microreactor, and the residence times were extracted by this distribution. The results of the computational study suggest that for the best-performing microreactor design, a PCR of 30 cycles can be achieved in less than 3 min. Subsequently, a PCB chip was fabricated based on the design that performed best in the computational study. PCB constitutes a great substrate as it allows for integrated microheaters inside the chip, permitting at the same time low-cost, reliable, reproducible, and mass-amenable fabrication. The fabricated chip, which, at the time of this writing, is the first CL μPCR chip fabricated on a PCB, was tested by measuring the temperatures on its surface with a thermal camera. These results were then compared with the ones of the computational study, in order to evaluate the reliability of the latter. The comparison of the calculated temperatures with the measured values verifies the accuracy of the developed model of the microreactor. As a result of that, a total power consumption of 1.521 W was experimentally measured, only ~7.3% larger than the one calculated (1.417 W). Full validation of the realized CL μPCR chip will be demonstrated in future work.

Parallel DNA amplification by convective polymerase chain reaction with various annealing temperatures on a thermal gradient device.

Multichannel Oscillatory-Flow PCR Micro-Fluidic Chip with Controllable Temperature Gradient

Ultrafast Microfluidic PCR Thermocycler for Nucleic Acid Amplification

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

A Low-Cost and Fast Real-Time PCR System Based on Capillary Convection.

Biochemically Programmable Isothermal PCR

Implementation of Rapid Nucleic Acid Amplification Based on the Super Large Thermoelectric Cooler Rapid Temperature Rise and Fall Heating Module

Glass-composite prototyping for flow PCR with in situ DNA analysis

High-throughput SNP genotyping by single-tube PCR with Tm-shift primers.

A power-efficient thermocycler based on induction heating for DNA amplification by polymerase chain reaction

Portable Heating System Based on a Liquid Metal Bath for Rapid PCR.

Practical integration of polymerase chain reaction amplification and electrophoretic analysis in microfluidic devices for genetic analysis

Simulation of Rapid Thermal Cycle for Ultra-Fast PCR

Centrifugal Microfluidic System For Nucleic Acid Amplification And Detection

An Integrated, Real-Time Convective PCR System for Isolation, Amplification, and Detection of Nucleic Acids

Temperature control technology for PCR

A Rapid and Low-Cost PCR Thermal Cycler for Low Resource Settings

High-throughput PCR in silicon based microchamber array

Closed-Loop Microreactor on PCB for Ultra-Fast DNA Amplification: Design and Thermal Validation

Lead-start isothermal polymerase amplification controlled by DNAzymatic switches.

Amplification of Escherichia coli in a Continuous-Flow-PCR Microfluidic Chip and Its Detection with a Capillary Electrophoresis System