Abstract:2.25Cr-1Mo-0.25 V steel has been widely used to manufacture hydro-processing equipment operating under harsh environments for its good creep performance. Warm bending, a common fabricating process of 2.25Cr-1Mo-0.25 V steel ring shells, inevitably changes the creep property of 2.25Cr-1Mo-0.25 V steel, but its detailed effect still remains obscure. In this work, we experimentally investigated the impact of warm bending on the microstructure and creep behavior of 2.25Cr-1Mo-0.25 V steel. First, a series of creep rupture tests were carried out at 482 °C and 350 MPa, in which test materials were extracted from an actually fabricated ring shell and its raw plate. Thereafter, the microstructures of test materials were semi-quantitatively analyzed by various characterization techniques, such as electron backscatter diffraction (EBSD) and three-dimensional high-resolution X-ray computed tomography (3D μ-XCT). Finally, warm forming induced microstructural degradation as well as their implication for creep was discussed in detail. Creep rupture tests showed that warm bending leads to a significant decrease in creep lifetime at the surface region of virgin plate but a slight decline at the central region of virgin plate. An inhomogeneous creep resistance distribution was thereby revealed along the thickness direction of the ring shell, which could not be completely eliminated by subsequent tempering at 705 °C for 8 h. Moreover, microstructural observations demonstrated that warm deformation leads to multiple microstructural deterioration, including carbide coarsening, ferrite matrix softening, void defect increasing, etc. Their combined action appears to accelerate the creep fracture behavior of 2.25Cr-1Mo-0.25 V steel. This work will contribute to the long-term safety and integrity assessment of 2.25Cr-1Mo-0.25 V steel structures. Graphical abstract

Creep Damage in Heat Affected Zone of 2.25Cr-1Mo Steel Welded Joint after Using under Long-Term High Temperature

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

High-Temperature Tensile and Creep Behavior in a CrMoV Steel and Weld Metal

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Numerical investigation on the creep damage induced by void growth in heat affected zone of weldments

Microstructure and Damage Evolution of Inconel 740H Welded Joint during Creep Process at 750 °C

Remaining creep properties and fracture behaviour of P92 steel welded joint under prior low cycle fatigue loading

Numerical Simulation of Void Growth Induced Creep Rupture in HAZ at Elevated Temperature

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

Creep Damage Assessment of Ex-Service 12% Cr Power Plant Steel Using Digital Image Correlation and Quantitative Microstructural Evaluation

Profiling hardness and microstructural evolution in the soft zone of 1.25Cr-0.5Mo heat-resistant steel subjected to varied creep durations

Creep Rupture Behavior in Dissimilar Weldment Between FB2 and 30cr1mo1v Heat-Resistant Steel

Creep behavior and in-depth microstructural characterization of dissimilar joints

Insight into the creep-fatigue interaction and remaining creep damage mechanisms in different micro-regions of 9%Cr steel welded joints

Creep damage mechanism of 20Cr32Ni1Nb steel at high temperatures

Study on Creep Damage of Weldments of HK40 Furnace Tubes Based on Creep Damage Mechanics

Creep damage and crack propagation behavior of printed circuit heat exchanger manufactured by diffusion welding: from material to structure