Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Fiber‐Oriented Liquid Crystal Polarizers Based on Anisotropic Electrospinning

A Type of Lyot Fiber Depolarizer Based on Photonic Crystal Fiber

Polymer Stabilized Cholesteric Liquid Crystal Particles with High Thermal Stability

Polarization Control by Using Anisotropic 3-D Chiral Structures

Freestanding Scattering Polarizer Assembled with Subnanowires and Liquid Crystals

Composite Film Polarizer Based on the Oriented Assembly of Electrospun Nanofibers.

An Electrically Tunable Polarizer for a Fiber System Based on a Polarization-Dependent Beam Size Derived From a Liquid Crystal Lens

Research on Lyotropic Liquid Crystal Thin Polarizing Films

An Optical Circular-Polarization Modulator Based Liquid Crystal

In-line High Efficient Fiber Polarizer Based on Surface Plasmon

Thin-film polarizing beam splitters used in liquid crystal projection display

Polarization Characteristics of Polymer Dispersed Liquid Crystal Films and Their Effects on Electro-Optical Properties

Liquid Crystal Fibers Produced by Using Electrospinning Technique

In Situ Fabrication of Lead-Free Cs 3 Cu 2 I 5 Nanostructures Embedded in Poly(Vinylidene Fluoride) Electrospun Fibers for Polarized Emission

Fiber Polarizer Based on Selectively Silver-Coated Large-Core Suspended-Core Fiber.

Electrically controllable liquid crystal paraxial Fresnel zone plate based on concentric zones patterned electrode

Integrated Optical Polarizers Based on Novel 2D Materials

Optomechanical Properties of Stretched Polymer Dispersed Liquid Crystal Films for Scattering Polarizer Applications

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Wide-Band Reflective Polarizers from Cholesteric Liquid Crystals with Stable Optical Properties

Polarization variable line-space grating based on photoalignment liquid crystal