Abstract:The single crystalline of the prototype Ni-Mn-Ga ferromagnetic shape memory alloy exhibits a huge magnetic field-induced strain of 6% due to the re-orientation of twin variants. Therefore, it is promising as the magneto-driven actuator material. However, the magnetic field or mechanical stress applied along the orthogonal direction is necessary to restore the deformed bulk single crystal into the original shape. In order to avoid an application of the extra fields, the Ni-Mn-Ga particles/polymer composite is an alternative solution supported by the concept of the accumulated stress in a polymer matrix which drives a deformation recovery of the composite during switching off of the magnetic field. The objective of this study is to clarify the effect of embedded particle shape on the deformation recovery of Ni-Mn-Ga particles/silicone composites by using the finite element method (FEM) and to investigate the local stress distribution in a polymer matrix between either spherical or rectangular shape particles pairs, whereby to provide the guidelines for design/optimization of the magneto-strain-active Ni-Mn-Ga particles/polymer composites. The case studies of the simulation are divided into an isolated particle and a pair of particles, the particles being positioned either parallel or perpendicular to the applied magnetic field direction. Particularly, the simulations reveal that in case of 200 μm of the inter-particle distance in the pair of spherical particles aligned perpendicularly to the applied field, the polymer layer between particles generates the compressive recovery stress of -0.32 MPa, which is insufficient to restore the deformation of the embedded Ni-Mn-Ga particles during removal of the magnetic field. By contrast, the strain recovery effect can be achieved for the rectangular particle pairs, generating the stress concentration in a matrix of about -0.5MPa, in a similar condition and arrangement.

In-situ Studies of Stress- and Magnetic-Field-induced Phase Transformation in a Polymer-Bonded Ni–Co–Mn–In Composite

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Magnetic-field-driven Reversal Phase Transition in Highly Textured and Self-Accommodated Martensites of Ni–Co–Mn–In Composite

In Situ High-Energy X-ray Studies of Magnetic-Field-induced Phase Transition in a Ferromagnetic Shape Memory Ni–Co–Mn–In Alloy

Direct Evidence on Magnetic-Field-Induced Phase Transition in A Nicomnin Ferromagnetic Shape Memory Alloy under A Stress Field

Magnetic-field-induced shape recovery by reverse phase transformation

Ferromagnetic Composite with Stress-Insensitive Magnetic Permeability: Compensation of Stress-Induced Anisotropies

In Situ X-Ray Diffraction Study of Deformation Behavior in A Fe/Niti Composite

Manipulation of the Martensitic Transformation and Exchange Bias Effect in the Ni45Co5Mn37In13 Ferromagnetic Shape Memory Alloy Films

Deformation indeuced phase seperation of Ni 45Co 5 Mn 36.7In 13.3 alloy at high temperature

Influence of superelastic training and huge strains on field-induced martensitic variants reorientation in particulate Ni–Mn–Ga/silicone composite

Two Types of Martensitic Phase Transformations in Magnetic Shape Memory Alloys by In-Situ Nanoindentation Studies

Banded-like Morphology and Martensitic Transformation of Dual-Phase Ni–Mn–In Magnetic Shape Memory Alloy with Enhanced Ductility

Deformation Induced Phase Seperation of Ni<sub>45</sub>Co<sub>5</sub> Mn<sub>36.7</sub>In<sub>13.3</sub> Alloy at High Temperature

Progress of Magnetic Field-Driven Phase Transformation Materials

The Effect of Particle Shape on Magnetic Field-Induced Rubber-Like Behavior of Ni-Mn-Ga/Silicone Composites

Phase-field simulations of magnetic field-induced strain in Ni2MnGa ferromagnetic shape memory alloy

Enhanced metamagnetic shape memory effect in Heusler-type Ni37Co11Mn43Sn9 polycrystalline ferromagnetic shape memory alloy

Magnetic-field-induced transformation and strain in polycrystalline FeMnGa ferromagnetic shape memory alloys with high cold-workability

Designing [100]-Oriented Mn0.988Ni0.012CoSi/epoxy Composites with Large and Reversible Magnetic-Field-induced Strain by Curing under a Rotating Magnetic Field

Constrained Martensitic Transformation in an in Situ Lamella TiNi/NbTi Shape Memory Composite