Abstract:The Nyquist wavelength-division multiplexing technique enable a solution to achieve high spectral efficiency in long-haul transmission system. Compare to polarization division multiplexing quadrature-phase-shift-keying, even high-level modulation scheme such as polarization division multiplexing 16-quadrature-amplitude-modulation is much more sensitive to intra-channel noise and inter-channel linear crosstalk caused by Nyquist wavelength-division multiplexing. We experimentally demonstrated the generation and transmission of the 6 × 128-Gb/s Nyquist wavelength-division multiplexing sixteen quadrature amplitude modulation signal over 1200-km single-mode fiber (SMF)-28 with Erbium-doped fiber amplifier only amplification with a net SE of 7.47 b/s/Hz, which is so far, to our knowledge, the highest SE for the signal with the bit rate above 100-Gb/s using the polarization-division multiplexing 16-quadrature-amplitude-modulation format. This experiment was successfully enabled by digital-signal-processing (DSP) pre-equalization of transmitter-side impairments and DSP post-equalization of the channel and receiver-side impairments. Nyquist-band is considered in the pre- equalization to enhance the tolerance of the polarization-division multiplexing 16-quadrature-amplitude-modulation to the aggressive spectral shaping. The bit error rate for each of the 6 channels is smaller than the limitation of the forward-error-correction limit of 3.8 ×10-3 after 1200-km SMF-28 transmission.

Bi-Directional Transmission of 8 X 10gb/s Dpsk Signals over 80km of Smf-28 Fiber Using In-Line Semiconductor Optical Amplifier

Bi-directional transmission of 8×10 Gb/s DPSK signals over 80 km of SMF-28 fiber using in-line semiconductor optical amplifier

200 Gb/s Unamplified IM/DD Transmission over 20-km SMF with an O-band Low-Chirp Directly Modulated Laser

Bidirectional DPSK Transmission of 16 × 10-Gb/s DWDM Channels over 80-Km SMF-28 Using Semiconductor Optical Amplifiers

Interleaved Bidirectional Transmission of 16 $\times$ 10-Gb/s DWDM Signals Using DPSK Modulation Format and In-line Semiconductor Optical Amplifiers

Bidirectional Delivery of 54-Gbps 8QAM W-Band Signal and 32-Gbps 16QAM K-Band Signal over 20-Km SMF-28 and 2500-M Wireless Distance

WDM Transmission of 108.4-Gbaud PDM-QPSK Signals (40×433.6-Gb/s) over 2800-Km SMF-28 with EDFA Only

432Gbit/s O-OFDM QPSK Signal Transmission over 400km SMF-28 with EDFA-only Amplification

Penalty-free bidirectional transmission of 4/spl times/10 Gbit/s signals over 88-km of true-wave fiber using an in-line semiconductor optical amplifier

Transmission Of 8x128.8gbaud Single-Carrier Pdm-Qpsk Signal Over 2800-Km Edfa-Only Smf-28 Link

Transmission of 42.8-Gb/s Polarization Multiplexed RZ-QPSK DWDM Signals over 3900 Km with 12.5-Ghz Channel Spacing and Coherent Detection

20x112gbit/S, 50ghz Spaced, Polmux-Rz-Qpsk Straight-Line Transmission Over 1540km Of Ssmf Employing Digital Coherent Detection And Pure Edfa Amplification

Generation Of 153.6gbaud (614.4gbps) Pdm-Qpsk Signals And Transmission Of Over 1200km Smf-28 With Edfa-Only Amplification

6$\,\Times\,$ 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission over 1200-Km SMF-28 with SE of 7.47 B/s/hz

Bidirectional Full-duplex Delivery of 103Gbps PS-256QAM Signals over 20-km SMF and 4600-m Wireless

6 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission Over 1200-km SMF-28 With SE of 7.47 b/s/Hz

Single Wavelength 248-Gb/s transmission over 80-km SMF Based on Twin-SSB-DMT and Direct Detection

Transmission of 8×128.8Gbaud single-carrier PDM-QPSK signal over 2800-km EDFA-only SMF-28 link

7 $\,\times\,$ 224 Gb/s/ch Nyquist-WDM Transmission over 1600-Km SMF-28 Using PDM-CSRZ-QPSK Modulation

82.29-Tb/s (182x560-Gb/s) Transmission of 42GHz-Spaced WDM PDM-128-QAM OFDM Signals over 100-km SMF

Field Transmission of I OOG and Beyond: Multiple Baud Rates and Mixed Line Rates Using Nyquist-WDM Technology