Abstract:With the rapid development of the industrialization process in the world, wastewater's inorganic nitrogen concentration could not be ignored simply. Composite semiconductor materials have been used for many years in electrocatalysis, Titanium dioxide, a semiconductor, is an inactive oxygen evolution electrocatalyst because of its low conductivity and poor reactivity. This study prepared three-electrode configuration, which.represents double-layered nanoparticle titania electrocatalyst (Ti / Ir x Ta 1-x O y / nano-TiO 2 ; denoted as n-TEC) as anode and platinum foil as cathode. The main anodic reactions are the formation of chlorine and decomposition of Ammonia. Through EPMA, SEM, XRD, XPS, EPR, Raman etc., combine with electrochemical test on anode cell (mediate the decomposition of ammonia and electrocatalytic oxidations of chloride), respectively. Hence stability and durability of electrocatalyst materials are major challenges that need to be optimized, hundreds hours of catalytical experiment has been prepared, characterization of the electrodes was compared before and after experiment as well. On the basis of original electrode (raw n-TEC), we did hydrogen thermal treatment. The electrodes show great differences under different retreatment conditions, free chlorine’s faraday efficiency promoted by 6%, which leads to a discussion of the effect of oxygen vacancies on the material. Conductivity should be taken into consideration with electrochemical impedance spectroscopy (EIS) test, after hydrogen thermal treatment charge transfer resistance has been increased 46%. In view of the influence of different constituent materials on electrochemical or electrocatalytic properties, new sights for the engineering and other aspacts of electrochemical are provided.

Impact and Removal of Iron Impurity in Acid Tin Plating Bath

Study of Hydrogen Thermal Treatment IrxTa1-XOy/Nano-TiO2 Catalyzing Ammonium

Improved electrochemical performance of trivalent-chrome coating on Al 6063 alloy via urea and thiourea addition

Study of tin-cerium alloy electroplating using ultrasonic

Removal of Terephthalic Acid in Alkalized Wastewater by Ferric Chloride

Combined Fenton process and sulfide precipitation for removal of heavy metals from industrial wastewater: Bench and pilot scale studies focusing on in-depth thallium removal

Lead-tin alloy electroplating applied to superconducting resonator

Effects of metal ions on THMs and HAAs formation during tannic acid chlorination

Enhanced removal performance of zero-valent iron towards heavy metal ions by assembling Fe-tannin coating

Effect of Tin Ion Additive on Zinc Electrode in Alkaline Solution

Effect of Humic Acid on the Removal of Chromium(VI) and the Production of Solids in Iron Electrocoagulation.

Benzaldehyde derivatives on tin electroplating as corrosion resistance for fabricating copper circuit

Thallium separation from wastewater using α-FeOOH@Biochar: Efficacy and mechanism

Leaching characteristics and stabilization of heavy metals in tin-polymetallic tailings by sodium diethyl dithiocarbamate intercalated montmorillonite (DDTC-Mt)

Degradation of TAIC by iron-carbon micro-electrolysis

Effect of Tin on the Corrosion Resistance of 16 Cr Ferritic Stainless Steel in Acidic Solution and Chloride-Containing Media

Harmless Treatment of High Arsenic Tin Tailings and Environmental Durability Assessment

Removal of chromium from tannery industry wastewater using iron-based electrocoagulation process: experimental; kinetics; isotherm and economical studies

Enhanced Adsorptive Removal of Cr (VI) from Plating Industry Wastewater Using CoFe2O4/CTAB Magnetic Nanocomposites

Effective Removal of Thallium, Recovery, and Kinetic Research by MnO2@HKUST-1 for Wastewater

Methods for Treating Strong Chelate-Containing Wastewater PartⅡ——Chelation/precipitation Process for the Treatment of Mixed Electroplating Wastewater