Abstract:Rechargeable Li ion batteries have been widely applied in daily lives. The demand for Li ion batteries with higher energy density has been increasing especially with the thriving development of electric vehicles in the past decade. Li(Ni 1−x−y Mn x Co y )O 2 (NMC) is one of the most successful commercial cathodes with various transition metal (Ni, Mn, and Co) ratios. Higher Ni content in the composition of NMC gives rise to higher energy density but at the price of structural and thermal stability. Recently, synthesizing single-crystal cathode particles has been extensively investigated as a strategy to enhance the stability of NMC cathodes. Most commercial NMC cathode particles possess polycrystalline structure, which is prone to induce intergranular cracking and parasitic reactions with the electrolyte upon cycling due to grain boundaries and large surface area. In contrast, single crystal NMC cathodes show higher cycling stability than their polycrystalline counterparts. However, the synthesis of single crystal normally requires higher temperatures and longer calcination duration than that of the polycrystalline counterparts for solid state synthesis. Alternatively, molten salt synthesis of single crystals is less energy-intensive and capable of tuning particle morphology and size. However, there is not yet a systematic guideline for the molten salt synthesis of single crystal Ni-rich NMC cathodes. Herein, we studied the effect of different synthetic parameters on the performance of single crystal Ni-rich NMC cathodes. We applied statistical analysis tools to correlate the synthetic conditions with cathode properties and optimized the synthetic parameters. Furthermore, we investigated the effect of single crystal size on the cathode performance. Our findings provided new insights into the synthesis and understanding of single crystal Ni-rich cathodes.

Research on Influence of Electrolytic Condition in Preparation of Ni from NiO by Molten Salt Electrolysis

Preparation of Ni3Sn2 Alloy Negative Electrode for Lithium-Ion Batteries by Electro-Deoxidization in Molten Salt

Corrosion Behavior of the Nickel Electrode in LiCl-KCl-MgCl2 Molten Salt in Ni-Mg Alloy formation process

RESEARCH ON PREPARATION OF NICKEL POWDER BY ELECTROLYTIC DEOXIDATION FROM NiO

Preparation and Electrochemical Properties of Nickel Oxide by Molten-Salt Synthesis

Synthesis and Size Control of Single Crystal Ni-Rich Layered Oxide Cathodes Using Statistical Analysis-Guided Molten Salt Method

Exploring the Mechanisms of LiNiO2 Cathode Degradation by the Electrolyte Interfacial Deprotonation Reaction

Research on the Preparation and Electrochemical Properties of NiO Anode Films

EIS study of oxidation heat‐treatment effects on corrosion behavior of Ni10Cu11Fe6Al metallic inert anode inside molten calcium chloride salt

Solubility of NiO in Molten Carbonate Prepared by Different Methods

Understanding the Effect of the Concentration of LiNO₃ Salt in Li–O₂ Batteries

Controlling of Ni-Based Composites in Salt Melt Synthesis with High Sodium-Ion Storage Performance

Unravelling the effect of Cl - on alkaline saline water electrooxidation on NiFe (oxy)hydroxides

Effect of Electrolysis Temperature on the Preparation of FeO by Molten Salt Electrolysis

Effects of pre-electrolysis dehydration and electrolysis time on TiO2deoxidation behavior during molten salt electrolysis

Molten Salt Electrolysis Materials Used in Electro- Deoxiedation

Effect of Ni on the oxidation behavior of corrosion products that form on low alloy steel exposed to a thin electrolyte layer environment

Local Basicity Dependent Gas-Liquid Interfacial Corrosion of Nickel Anode and Its Protection in Molten Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

Direct Electrochemical Preparation of Ni-Zr Alloy from Mixture Oxides in LiCl Molten Salt

Effect of Preparation Condition on Electrochemical Property of Nano-Nickel Powders