Abstract:The detection of impact damage in fibre reinforced composites is of significant concern because such damage can reduce the load-bearing ability of the composite. A number of factors can influence the nature and extent of impact damage development in composites including: (a) the type of reinforcing fibre and resin system; (b) the magnitude of the residual (fabrication) stresses; (c) the lay-up sequence; and (d) other factors such as the nature of the impactor, impact velocity, impact energy, temperature, moisture content in the composites, etc. From a structural health monitoring point of view, it is necessary to investigate the distribution of damage through the thickness of the composite.This paper reports on a simple, partially multiplexed optical fibre strain sensor system for in-situ strain and residual strain measurements in a carbon fibre reinforced epoxy composite. An extrinsic Fabry-Perot interferometric (EFPI) sensor design was used along with single-mode fibres. The multiplexing scheme was based on wavelength division via the use of two super luminescent diodes (SLDs) at different wavelengths. A low-cost fibre optic CCD spectrometer was used as the detector. The multiplexing scheme was demonstrated using two EFPI sensors. In principle, a number of EFPI sensors can be multiplexed using the proposed scheme provided that each sensor is illuminated at a specified and different wavelength.The feasibility of detecting the residual strain in the composite was demonstrated successfully at two specified positions within a 16-ply carbon fibre reinforced composite panel. Preliminary results indicated that the sensor system was also capable of detecting the effects of a 3.2 J impact. Excellent correlation was obtained between the EFPI sensor output and that obtained using surface mounted strain gauges.

NDE of Smart Structures Using Multimode Fiber Optic Vibration Sensor

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Fiber Optic Vibration Sensor-Based Smart Civil Structures

Non-destructive evaluation of smart materials by using extrinsic Fabry–Perot interferometric and fiber Bragg grating sensors

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Vibration Measurement of Smart Composite Structures by Using the New Intensity Modulated Optical Fiber Sensor

Structural Health Monitoring Using A Novel Fiber Optic Fabry-Perot Sensor System

Real-Time Structural Health Monitoring Using a Novel Fiber-Optic Accelerometer System

Structural Health Monitoring Using Textile Reinforcement Structures with Integrated Optical Fiber Sensors

Smart composite materials and their damage assessment system

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Multifunction Fiber Optic Sensing System for Smart Applications

Damage Assessment Of Composite Laminate By Using Fiber Optic Ae Sensor Based On Fused-Tapered Coupler

Structural Health Monitoring of Smart Composite Materials by Using EFPI and FBG Sensors

STRUCTURAL HEALTH MONITORING BASED ON LONG-DISTANCE EMBEDDED OPTICAL FIBER SENSOR

Damage Detection in FRP Structures Using Fiber Bragg Grating Dynamic Strain Sensing Systems

Seismic Damage Identification for Steel Structures Using Distributed Fiber Optics.

A Multiplexed Optical Fibre-Based Extrinsic Fabry-Perot Sensor System Forin-Situstrain Monitoring in Composites

A Multiplexed Extrinsic Fabry-Perot Sensor System for In-Situ Strain and Impact Damage Detection in Composites

A Novel Multifunctional Optical Fiber Sensor Based on Fbg and Fiber Optic Coupler

Multifunctional Fiber Bragg Grating sensing system for load monitoring of composite wings