Abstract:Compared with the traditional non-cutting measurement, machining tests can more accurately reflect the kinematic errors of five-axis machine tools in the actual machining process for the users. However, measurement and calculation of the machining tests in the literature are quite difficult and time-consuming. A new method of the machining tests for the trunnion axis of five-axis machine tool is proposed. Firstly, a simple mathematical model of the cradle-type five-axis machine tool was established by optimizing the coordinate system settings based on robot kinematics. Then, the machining tests based on error-sensitive directions were proposed to identify the kinematic errors of the trunnion axis of cradle-type five-axis machine tool. By adopting the error-sensitive vectors in the matrix calculation, the functional relationship equations between the machining errors of the test piece in the error-sensitive directions and the kinematic errors of C-axis and A-axis of five-axis machine tool rotary table was established based on the model of the kinematic errors. According to our previous work, the kinematic errors of C-axis can be treated as the known quantities, and the kinematic errors of A-axis can be obtained from the equations. This method was tested in Mikron UCP600 vertical machining center. The machining errors in the error-sensitive directions can be obtained by CMM inspection from the finished test piece to identify the kinematic errors of five-axis machine tool trunnion axis. Experimental results demonstrated that the proposed method can reduce the complexity, cost, and the time consumed substantially, and has a wider applicability. This paper proposes a new method of the machining tests for the trunnion axis of five-axis machine tool.

STUDY ON KINEMATIC TRANSFORMATION FROM TRADITIONAL MACHINE TOOL TO FREE-FORM ONES BASED ON SPATIAL KINEMATICS

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Study of Free-Form Surface Non-Contact Measurement子Path Planning and Related Algorithms

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Machining tests to identify kinematic errors of machine tool table rotation axis based on sensitive directions

Research on Spatial Kinematics of 5-axis CNC Machine Tools

Modeling Volumetric Errors of Universal Spindle Head of Five-axis CNC Machine Tool

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

A Planning Algorithm Of Trajectory And Feedrate Generation Of Spatial Motion

High-precision modeling of CNCs’ spatial errors based on screw theory

Research on high-precision geometric simulation for turning machining based on tool driven

Kinematics characterizing with dual quaternion and parametric modeling of geometric error terms based on measuring path planning of CNC machine tools

Tool orientation planning for five-axis CNC machining of open free-form surfaces

Kinematic modeling and machining precision analysis of multi-axis CNC machine tools based on screw theory

Analysis and Compensation of Kinematic Errors in a Five-Axis Machine Tool Based on an Internal Data-Driven Method

Research on Tool Axis Vector Optimization Based on Kinematical Constraints