Abstract:Uniform/gradient lattice cylindrical structures (ULCS/GLCS) and hybrid uniform/gradient lattice cylindrical structures (HULCS/HGLCS) are innovatively designed and fabricated. The axial crushing behaviors of these four-type cylindrical structures are investigated by the quasi-static axial compression experiments and numerical simulations. The influence of the density gradient and the hybrid effect (metal skin+ABS core) on the deformation mode, loading capacity, and energy absorption of the lattice cylindrical structures are elaborated systematically. The results show that the gradient design realizes the function of regulation and controllability of the structural deformation. The softer layers (with smaller relative density) in GLCS begin to deform first and then gradually extend to the harder layers (with larger relative density). And it effectively reduces the initial peak compression force ( PCF ), and makes the load more stable on the premise of energy absorption. However, unstably catastrophic failures are observed before the final densification in both ULCS and GLCS during the compression due to the brittleness of the ABS material and the compression–expansion deformation of structure. For HULCS/HGLCS, it presents progressive crushing mode and overcome the unstably catastrophic failure due to the ductility and constraint of the metal skins. The effect of "1 + 1 > 2" on energy absorption from hybrid effect is achieved in HULCS/HGLCS, in which the EA of HULCS and HGLCS increases by 74.62% and 100.78% comparing the sum of all components individually compressed. Moreover, the progressive peak with increasing trend of HGLCS demonstrated that the hybrid design enhances the advantages of gradient design in sandwich structures.

Collapse of periodic planar lattices under uniaxial compression, part II: Dynamic crushing based on finite element simulation

Collapse of periodic planar lattices under uniaxial compression, part I: Quasi-static strength predicted by limit analysis

Dynamic Crushing Behavior and Energy Absorption of Graded Lattice Cylindrical Structure under Axial Impact Load

Compressive properties and collapse behavior of additively-manufactured layered-hybrid lattice structures under static and dynamic loadings

Crushing behavior and energy absorption of a bio-inspired bi-directional corrugated lattice under quasi-static compression load

Plastic yield and collapse mechanism of planar lattice structures

Non-symmetric deformation of lattices under quasi-static uniaxial compression

Axial Crushing Behaviors of Multi-Cell Tubes with Triangular Lattices

Effects of High Order Deformations on the Strength of Planar Lattice Materials

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Transition of Buckling Patterns and Its Effects on Elastic Wave Propagation in Lattice Structures

Deformation and failure mechanisms of lattice cylindrical shells under axial loading

Compression Behaviors and Mechanical Properties of Modified Face-Centered Cubic Lattice Structures under Quasi-Static and High-Speed Loading

Axial Crushing of Triangular Tubes

Influence of density gradient and hybrid effect on quasi-static axial crushing behavior of lattice cylindrical structures

Uniaxial local buckling strength of periodic lattice composites

Bending Collapse and Energy Absorption of Dual-Phase Lattice Structures

Size-dependency and lattice-discreetness effect on fracture toughness in 2D crystals under antiplanar loading

Mechanical behavior of Ti-6Al-4V lattice-walled tubes under uniaxial compression