Abstract:Bifunctional reactive polyhedral oligomeric silsesquioxane (POSS) of 3, 13-divinyl octyphenyl silsesquioxane (DV-DDSQ) and 3, 13-dihydro octyphenyl silsesquioxane (DH-DDSQ) were used as additive to modify ethylene-propylene-diene rubber (EPDM), and double vinyl groups or active hydrogen groups of bifunctional reactive POSS (brPOSS) underwent a cross-linking reaction with the active hydrogen groups and double bonds of EPDM, to investigate the effect of brPOSS regulating functional reaction group on the properties of EPDM. Crosslinking density, mechanical properties, thermal stability and ablation performance of brPOSS modified EPDM were investigated, and the pyrolysis behavior and surface structure of modified EPDM was analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Furthermore, the ablation performance of brPOSS modified insulation based on EPDM was investigated. The results showed that the tensile strength of EPDM/DV-DDSQ and EPDM/DH-DDSQ increased by 35.8% and 55.3% respectively compared with EPDM; the tear strength increased by 6.4% and 5% than that of EPDM. Moreover, the 5% initial thermal decomposition temperature based on thermogravimetric analysis (TGA) and mass (or linear) ablation rate ablative performance of brPOSS modified EPDM were optimized to a certain extent, and the ablative performance of brPOSS modified insulation based on is significantly improved, the mass ablation rate of DV-DDSQ/insulation and DH-DDSQ/insulation decreased by 35.4% and 41.6% respectively, and linear ablation rate decreased by 38.2% and 39.4% respectively.

Effect of Different Kinds of Modified Bructies on Properties of PP/EPDM Composite

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Effect of oleic acid on improving flame retardancy of brucite in low‐density polyethylene composite

The Properties and Morphologies of Composites Based on Sulfated EPDM Ionomer Toughed Polypropylene Highly Filled with Mg(OH)2

Brucite Modified Epoxy Mortar Binders: Flame Retardancy, Thermal and Mechanical Characterization

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Mechanical Properties and Flame-Retardant of PP/MRP/Mg(OH)2/Al(OH)3 Composites

Encapsulating montmorillonite and ammonium polyphosphate in one polyurea microcapsule to improve flame‐retardant and mechanical properties of polypropylene composites

Influence of PP-g-MAH on the Structure and Properties of SEBS/PP/MH/EG Flame-retardant Composites

Investigation of the Flame-Retardant and Mechanical Properties of Bamboo Fiber-Reinforced Polypropylene Composites with Melamine Pyrophosphate and Aluminum Hypophosphite Addition

Flammability, thermal stability, and mechanical properties of ethylene‐propylene‐diene monomer/polypropylene composites filled with intumescent flame retardant and inorganic synergists

Toughening study on flame retardance high impact polystyrene by SBS and EPDM

Influence of BN doped 2‐hydroxyethyl methacrylate phosphate coated expandable graphite on flame retardancy and thermal conductivity of styrene‐butadiene rubber composites

Effect Factors of the Combustion Property of Halogen-free Flame-retardant EPDM

Mechanical Properties of Halogen-free Flame Retardant PP/APP/PTP/PER Composite

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Thermal degradation and flame retarding characteristics of polypropylene composites incorporated with boron mud

Effects of difunctional reactive polyhedral oligomeric silsesquioxane on the properties of EPDM

Non-Halogen Flame Retardant Polypropylene with Expandable Graphite and Magnesium Salt Whisker