Abstract:In this study, a strategy to prepare CuO/Cu2O/Cu microwires which is fully covered by a nanowire network using a simple thermal oxidation process is developed. The CuO/Cu2O/Cu-microwires are fixed on Au/Cr pads with Cu microparticles. After thermal annealing at 425 °C, these CuO/Cu2O/Cu microwires are used as room-temperature 2-propanol sensors. These sensors show different dominating gas responses with operating temperatures, for example, higher sensitivity to ethanol at 175 oC, higher sensitivity to 2-propanol at room temperature and 225 oC, and higher sensitivity to hydrogen gas at ~ 300 oC, respectively. In this context, we propose the sensing mechanism of this 3-in-1 sensor based on CuO/Cu2O/Cu. XRD studies reveal that the annealing time during oxidation affects the chemical appearance of the sensor, while the intensity of reflections proves that for samples oxidized at 425 ºC for 1 h the dominating phase is Cu2O, whereas upon further rising the annealing duration up to 5 h, the CuO phase becomes dominant. The crystal structure of the Cu2O-shell/Cu-core and the CuO-NWs networks on the surface were confirmed with TEM, HRTEM, and SAED, where (HR)TEM micrographs reveal the monoclinic CuO phase. DFT calculations brings valuable inputs to the interactions of the different gas molecules with the most stable topsurface of CuO, revealing strong binding, electronic band gap changes and charge transfer dueto the gas molecule interactions with the topsurface. This research shows the importance of the non-planar CuO/Cu2O layered hetero-structure as a bright nanomaterial for the detection of various gases, controlled by the working temperature, and the insight presented here will be of significant value in the fabrication of new p-type sensing devices through simple nanotechnology.

Gas-sensing properties of hollow and hierarchical copper oxide microspheres

Boosting Ethylene Glycol Sensing with Dendritic Hierarchical Cuo/Co3o4 Heterojunction Nanowire

CuO Hollow Microspheres Self-Assembled with Nanobars: Synthesis and Their Sensing Properties to Formaldehyde

Three-dimensional Hierarchical CuO Gas Sensor Modified by Au Nanoparticles

Microscale Analysis and Gas Sensing Characteristics Based on SnO2 Hollow Spheres

Development of Sensors Based on CuO-doped SnO2 Hollow Spheres for Ppb Level H2S Gas Sensing

Morphology-dependent formaldehyde detection of porous copper oxide hierarchical microspheres at near-room temperature

Cu-doped Α-Fe2o3 Hierarchical Microcubes: Synthesis and Gas Sensing Properties

Self-template Derived CuO Nanowires Assembled Microspheres and Its Gas Sensing Properties

Morphology-Dependent Gas Sensing Properties of CuO Microstructures Self-Assembled from Nanorods

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Highly sensitive ethanol gas sensor based on CuO/ZnSnO3 heterojunction composites

Preparation and gas-sensitive properties of hollow Zn2SnO4/SnO2 nano-cubes

Cu2O–CuO Composite Microframes with Well-Designed Micro/nano Structures Fabricated Via Controllable Etching of Cu2O Microcubes for CO Gas Sensors

Hydrothermal Synthesis, Characterization and Gas Sensing Properties of Novel Cu 2 O Open Hollow Nanospheres

Synthesis of hierarchical shell-core SnO2 microspheres and their gas sensing properties

Hierarchical Hollow MoS2 Microspheres As Materials for Conductometric NO2 Gas Sensors

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

A single CuO/Cu2O/Cu micro-wire covered by a nano-wire network as gas sensor for the detection of battery hazards.

Synergistic Effect of PdO and Parallel Nanowires Assembled CuO Microspheres Enables High Performance Room-Temperature H2S Sensor