Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Identification for Schmidt Number in Scalar Transport Process of Turbulent Flows

A Random Sampling Algorithm for Identification of Turbulent Prandtl Number

Numerical Study of Turbidity Current over a Three-Dimensional Seafloor

Gas-Kinetic Scheme Coupled with Turbulent Kinetic Energy Equation for Computing Hypersonic Turbulent and Transitional Flows

Identification of Parameters for Standard K-Ε Turbulence Model Based on Bayesian Inference

Turbulence Statistics and Scalar Transport in an Open-Channel Flow

Effect of Schmidt Number on the Stability of Laminar Stratified Flow

Numerical Simulation on the Scalar Transport in Rotating Channel Turbulence

Effect of Turbulent Schmidt Number on the Scalar Field Simulation of a Fluidic Precessing Jet Flow

Heat and Mass Transfer Equations for Turbulent Flow with Wide Ranges of Prandtl and Schmidt Numbers

Deviations from Unity of the Ratio of the Turbulent Schmidt to Prandtl Numbers in Stratified Atmospheric Flows over Water Surfaces

Direct numerical simulation of turbulent mass transfer at the surface of an open channel flow

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Computation of Hypersonic Turbulent and Transitional Flows Using an Extended Gas Kinetic Scheme

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Statistical theory of passive scalar turbulence within the viscous-convective range

Direct Numerical Simulation of Turbulent Pipe Flow with Uniform Surface Heat Flux.

Direct Numerical Simulation Of Turbulent Heat Transfer In An Axially Rotating Pipe Flow - Reynolds Shear Stress And Scalar Flux Budgets

Nanoparticle Migration in a Fully Developed Turbulent Pipe Flow Considering the Particle Coagulation

EFFECT OF SC NUMBER ON TURBULENT DIFFUSION OF PASSIVE SCALAR

Effect of Schmidt number on mass transfer across a sheared gas-liquid interface in a wind-driven turbulence