Abstract:Three methods for preparation of nanosized PtRu/C catalysts for direct methanol fuel cells are described. The first one is reduction of hexachloroplatinic acid and ruthenium chloride by formaldehyde in an aqueous phase. The second one is oxidative decomposition of Na6Pt(SO3)(4) and Na6Ru(SO3)(4) by hydrogen peroxide to mixture of PtOx and RuOy in an aqueous phase. The third one is reduction of hexachloroplatinic acid and ruthenium chloride in a mixture solvent of ethylene glycol and water. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to characterize the different samples in the as-synthesized state. Powder XRD patterns of the different catalysts in the as-synthesized state reveal an fcc pattern with different lattice parameters, which shows that different preparation methods influence the interaction between Pt and Ru. No evidence of separate metallic Ru or its oxide phases was found in the three PtRu/C samples. The nanoparticle size from XRD and TEM results are consistent. Both results indicate the PtRu/C sample synthesized by the third method has the smallest size and sharpest distribution. The three PtRu/C samples were adopted as anode catalysts for direct methanol fuel cell (DMFC) and the performances of single DMFC testing are used to evaluate the activity of different PtRu/C samples. The single DMTC with PtRu/C sample synthesized by the third method as anode catalyst shows better performance than that with other PtRu/C sample and commercial PtRu/C. The direct ethanol fuel cell (DEFC) with PtRu/C sample synthesized by the third method as anode catalyst also shows better performance than that with commercial PtRu/C. The single cell testing and the results of XRD and TEM indicate that the third method is a suitable method to prepare PtRu/C catalyst with higher metal loading. Other carbon supported Pt-based catalysts are also synthesized by this method, such as PtSn/C, PtRuSn/C for DMFC and DEFC. The single cell testing shows that PtSn/C is better for direct ethanol oxidation than PtRu/C, while PtRu/C is better than PtSn/C for direct methanol oxidation.

Synthesis of PtRu Nanowires and Their Catalytic Activity in the Anode of Direct Methanol Fuel Cells

Highly Stable Pt–Au@Ru/C Catalyst Nanoparticles for Methanol Electro-oxidation

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Highly active Pt–Ru nanowire network catalysts for the methanol oxidation reaction

Synthesis and Electrocatalytic Performance of Multi-Component Nanoporous PtRuCuW Alloy for Direct Methanol Fuel Cells

One-pot Synthesis of PtRu Nanodendrites As Efficient Catalysts for Methanol Oxidation Reaction.

A Novel Route to Prepare Pt-Based Electrocatalysts for Direct Methanol (ethanol) Fuel Cells

Polyol-synthesized PtRu/C and PtRu Black for Direct Methanol Fuel Cells

The Influence of Three Groups of Pt-Ru/C Catalyst’s Precursors on Its Performance for Direct Methanol Fuel Cell

Preparation and Characterization of A Ptru/C Nanocatalyst for Direct Methanol Fuel Cells

Engineering PtRu Bimetallic Nanoparticles with Adjustable Alloying Degree for Methanol Electrooxidation: Enhanced Catalytic Performance

Co-catalytic effect of Ni in the methanol electro-oxidation on Pt–Ru/C catalyst for direct methanol fuel cell

Template preparation of Pt–Ru and Pt nanowire array electrodes on a Ti/Si substrate for methanol electro-oxidation

Electrodeposition of Pt–Ru and Pt–Ru–Ni Nanoclusters on Multi-Walled Carbon Nanotubes for Direct Methanol Fuel Cell

The influence of acidic and alkaline precursors on Pt{single bond}Ru/C catalyst performance for a direct methanol fuel cell

Preparation of Supported PtRu/C Electrocatalyst for Direct Methanol Fuel Cells

Nanoarchitectonics for Modulation on the Electronic Structure of Ultrafine PtRuFe Nanowires As Robust Methanol Electrooxidation Catalysts

Alternative Aqueous Phase Synthesis of a PtRu/C Electrocatalyst for Direct Methanol Fuel Cells

MnO2/CNT supported Pt and PtRu nanocatalysts for direct methanol fuel cells.

Preparation and Characterization of Anode Catalysts PtRu/C for Direct Methanol Fuel Cells

A Simple Method for the Synthesis of PtRu Nanoparticles on the Multi-Walled Carbon Nanotube for the Anode of a DMFC