Abstract:Based on the most recently published mass transfer model of volatile organic compound (VOC) emissions from dry building materials, it is found that the dimensionless emission rate and total emission quantity are functions of just four dimensionless parameters, the ratio of mass transfer Biot number to partition coefficient (Bim/K), the mass transfer Fourier number (Fom), the dimensionless air exchange rate (Nδ2/Dm) and the ratio of building material volume to chamber or room volume (Aδ/V). Through numerical analysis and data fitting, a group of dimensionless correlations for estimating the emission rate from dry building materials is obtained. The predictions of the correlations are validated against the predictions made by the mass transfer model. Using the correlations, the VOC emission rate from dry building materials can be conveniently calculated without having to solve the complicated mass transfer equations. Thus it is very simple to estimate VOC emissions for a given condition. The predictions of the correlations agree well with experimental data in the literature except in the initial few hours. Furthermore, based on the correlations, a relationship between the emission rates of a material in two different situations is deduced. With this relationship, the results for a given building material in a test chamber can be scaled to those under real conditions, if the dimensionless parameters are within the appropriate region for the correlations. The relationship also explicitly explains the impacts of air velocity, load ratio, and air exchange rate on the VOC emission rate, which determines the feasibility of assuming that the VOC emission rates in real conditions are the same as those in the test chambers.

Study on A New Correlation Between Diffusion Coefficient and Temperature in Porous Building Materials

Study on Temperature Influences on VOC Diffusion Coefficient of Porous Building Materials

Influence of temperature on formaldehyde emission parameters of dry building materials

Experimental Determination of the Water Vapor Diffusion Coefficient of Autoclaved Aerated Concrete (aac) Via A Transient Method: Effects of the Porosity and Temperature

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

Association Between the Emission Rate and Temperature for Chemical Pollutants in Building Materials: General Correlation and Understanding.

Dimensionless Correlations For Voc Emissions From Dry Building Materials And Their Applications

Experimental study and processing method of formaldehyde diffusion within building materials

Dimensionless correlations to predict VOC emissions from dry building materials

Applying dimensionless correlations to VOC emissions from dry building materials

An improvement for dynamic twin chamber method to measure VOC diffusion coefficient and partition coefficient

A new method, c-history based sink effect method, of determining key physical properties of VOC emission from dry building materials

Determination of concentrations of mobile volatile organic compounds, the partition coefficient and the diffusion coefficient in dry building materials

Temperature Dependence of Volatile Organic Compound Emissions from Surface Coatings: Inter-species Difference Observed in Real Indoor Environments and Mechanistic Understanding

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

A Literature Review Investigating the Impact of Temperature and Humidity on Volatile Organic Compound Emissions from Building Materials

Characteristics and Correlations of VOC Emissions from Building Materials

Dynamic—static Chamber Method for Simultaneous Measurement of the Diffusion and Partition Coefficients of VOCs in Barrier Layers of Building Materials

A Method For Measuring The Diffusion And Partition Coefficients Of Volatile Organic Compounds In Barrier Layers

Impact Of Temperature On The Initial Emittable Concentration Of Voc In Building Materials: Experiment And Model Development