Abstract:An ultracompact and broadband polarization beam splitter (PBS) based on the polarization-dependent critical guiding condition of an asymmetrical directional coupler is proposed. The device consists of a pair of silicon waveguides with different height and width. Due to the different cutoff conditions for the TE and TM polarization modes, it is possible to have the TM mode guided in one waveguide while the TE mode is supported in both. Therefore, only the phase-matching condition for the cross-coupling of the TE mode needs to be considered. This approach not only simplifies the design procedures but also significantly improves device performance with smaller total length and larger bandwidth. Finally, regardless of the contribution of S-bend waveguides, our proposed PBS has a coupling region as short as 0.2 mu m, which is the shortest reported until now. The simulation result shows that the extinction ratios for the TE and TM polarization are 13.5 and 16.6 dB at their respective output ports, and their insertion losses are 0.29 and 0.13 dB, respectively. Numerical simulations also show that the device offers a very large bandwidth (similar to 140 nm) with large extinction ratio (> 10 dB) and low insertion loss (< 1 dB). (C) 2015 Optical Society of America

A COMPACT POLARIZATION BEAM SPLITTER BASED ON A MULTIMODE PHOTONIC CRYSTAL WAVEGUIDE WITH AN INTERNAL PHOTONIC CRYSTAL SECTION

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Proposal for an Ultracompact Polarization-Beam Splitter Based on a Photonic-Crystal-Assisted Multimode Interference Coupler

Experimental demonstration of an ultracompact polarization beamsplitter based on a multimode interference coupler with internal photonic crystals

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

Design and simulation of a compact polarization beam splitter based on dual-core photonic crystal fiber with elliptical gold layer

Design of Compact and Broadband Polarization Beam Splitters Based on Surface Plasmonic Resonance in Photonic Crystal Fibers

Numerical analysis of a compact all-fiber polarization beam splitter based on dual-core photonic crystal fiber with As 2 S 3 thin layer

Ultra-compact polarization beam splitter based on photonic crystal waveguides

Design of Polarization Beam Splitter in Two-Dimensional Triangular Photonic Crystals

Compact Polarization Beam Splitter Based on a Three-Waveguide Asymmetric Coupler with a 340-Nm-thick Silicon Core Layer

Efficient Polarization Beam Splitter Based on Two-dimensional Photonic Crystal

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition

Compact and High-Performance Silicon-on-insulator Polarization Beam Splitter Based on Microring Resonator

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Ultra-compact Polarization Splitter Based on a Multimode Interference Coupler with a Silicon Hybrid Plasmonic Waveguide

Ultracompact multiway beam splitters using multiple coupled photonic crystal waveguides