Abstract:A short polarization beam splitter (PBS) is presented based on an asymmetrical evanescent coupling system, which consists of a narrow input waveguide, a narrow output waveguide, and a wide middle optical waveguide between them. The width of the waveguides is designed so that the phase-matching condition is satisfied for the TM fundamental (TM0) mode in the narrow input/output waveguide and the first higher order TM (TM1) mode in the wide middle waveguide. Meanwhile, there is a significant phase mismatch for the case with TE polarization. Therefore, for the launched TE polarized light, almost no coupling happens when it goes through the coupling region and finally the TE polarized light is output from the through port. For the launched TM0 mode in the narrow input waveguide, it is completely coupled to the TM1 mode in the wide middle waveguide by choosing the optimal length of the coupling region. Furthermore, the TM1 mode excited in the wide middle waveguide is then coupled to the TM0 mode in the narrow output waveguide through the evanescent coupling between them. A short (similar to 25 mu m long) PBS is designed based on silicon-on-insulator nanowires, while the gap width is chosen as large as 300 nm to make the fabrication easy. Numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width ( more than +/- 20nm) and a broadband (similar to 50 nm) for an extinction ratio of >15 dB.

Compact and High-Performance Silicon-on-insulator Polarization Beam Splitter Based on Microring Resonator

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

High-Performance Silicon Polarization Beam Splitter Assisted by the Sub-Wavelength Structures

CMOS-compatible and Fabrication-Tolerant MMI-based Polarization Beam Splitter

Research on a Broadband Compact Polarization Beam Splitter

Compact Polarization Beam Splitter Based on a Three-Waveguide Asymmetric Coupler with a 340-Nm-thick Silicon Core Layer

Silicon Polarization Beam Splitter Based on an Asymmetrical Evanescent Coupling System with Three Optical Waveguides

Compact Polarization Beam Splitter Using an Asymmetrical Mach–Zehnder Interferometer Based on Silicon-on-Insulator Waveguides

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Ultra-Broadband And Ultra-Compact Polarization Beam Splitter Based On A Tapered Subwavelength-Grating Waveguide And Slot Waveguide

Compact Polarization Beam Splitter for Silicon Photonic Integrated Circuits with a 340-Nm-thick Silicon Core Layer.

Polarization Beam Splitter Based on Cascaded Step-Size Multimode Interference Coupler

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides