Abstract:Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

An Evaluation and Optimization Criteria Method for Structures with Damping Treatments Based on Strain Energy Analysis

ANISOTROPIC DESIGN AND ITS DAMPING ANALYSIS OF LAMINATED DAMPED STRUCTURE

Optimal Placement of Constrained Damping Material in Structures Based on Optimality Criteria

Topologic Optimization of a Free Damping Material Based on Optimal Criteria Method

Topology Optimization of Anisotropic Constrained Damping Structures Based on ESO Method

Optimization of Placements and Parameters of Dampers for Reducing Dynamic Response of Structures

Optimization Layout of Damping Material Using Vibration Energy-Based Finite Element Analysis Method

Modal Analysis of Thin Plate Structures with Damping Treatment Using Experiment and Finite Element Method

A Finite Element Analysis and Topology Optimization Method for Structures with Free Damping

Design Methods for Damping Materials Applied to Ships

OPTIMIZATION DESIGN OF VISCOUS DAMPERS BASED ON ENERGY AND CONTROL EFFECT INDEXES

Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach

Practical Design Procedure for a Energy-Dissipated Structure with Viscous Dampers

Optimal Design of Laminated Plate for Minimizing Frequency Response Based on Discrete Material Model and Mode Reduction Method

Study on Mechanical Properties and Parameter Optimization of Constrained Damping Structures

An Optimization Design Method for Constrained Damping Plate

Optimization Design of Thin-Walled Structure with Constrained Damping Layer

Optimal Design of Damping Material Configuration in Vehicle

Damping Optimization Noise Reduction Technique Based on Modal and Panel Contribution Analysis

A New Modal Strain Energy Method for Analyzing Dynamic Parameters of Viscoelastic Structures

Studies on Damping Characteristics and Parameter Optimization of Anisotropic Laminated Damped Structure