Abstract:Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

Study on Mechanical Properties and Parameter Optimization of Constrained Damping Structures

Study on relationship between damping characteristic of constrained damping cantilever beam and layer thickness

Modeling and Application for a Kind of Constrained Damping Structure

STUDY ON VIBRATION SUPPRESS OF A CABIN STRUCTURE BASED ON DYNAMIC TESTING

Optimization Design of Thin-Walled Structure with Constrained Damping Layer

Parameter Effects of the Main Controlled Anisotropic Layer on Structural Damping of Alternately Laminated Damped Structures

Modeling and Simulation of a Constrained Damping Beam with Slotted Stand-off Layer

Study on the Vibration Performance of a Multi-layer Flat Restrained Damping Structure

Viscous-damp vibration suppress technology and its application in beam structure

Topology Optimization of Anisotropic Constrained Damping Structures

Studies on Damping Characteristics and Parameter Optimization of Anisotropic Laminated Damped Structure

Parameter optimization of the dominant anisotropic layer of alternately laminated damped structures

Thickness optimization study of constrained damping plate

Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach

Structural Damping Effect On Deformation Of Flexible Flapping Wing

Research of the vibration restraint characteristics of the interlayer damped structure

An Optimization Design Method for Constrained Damping Plate

Effect of Damping Parameters on Vibration Response of Cantilever Plate with Viscoelastic Constrained Layer Damping Treatment

The Study On Friction Damping Technology With Constraint Friction Layer

Modal Analysis of Thin Plate Structures with Damping Treatment Using Experiment and Finite Element Method

Vibration Behavior and Damping Performance of Carbon Fiber Composite Double-Arrow Corrugated Auxetic Structures