Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Integrated control of main-signal and pre-signal on approach of intersection with double stop line

Traffic Signal Control Optimization Strategy Based on Simulation

Coordinated Control Model of Main-Signal and Pre-Signal for Intersections with Dynamic Waiting Lanes

Coordinated Optimization of Signal Timings for Intersection Approach with Presignals

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

A Group-Based Signal Timing Optimization Model Considering Safety for Signalized Intersections with Mixed Traffic Flows

General Multi-Phase Intelligent Control Method for Traffic Flow at Single Intersection

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

Minimum Cycle Length of Two-Phase Road Intersection

Isolated intersection control based on hybrid optimization model

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Traffic Design and Signal Timing of Staggered Intersections Based on a Sorting Strategy

Integration of Model-Based Signal Control and Queue Spillover Control for Urban Oversaturated Signalized Intersection

Maximum cycle length optimization method of signalized intersection

The optimization of lane assignment and signal timing at the tandem intersection with pre‐signal

A Cooperative Optimization Model for Variable Approach Lanes at Signaled Intersections Based on Real-Time Flow

Intersection control strategy optimization based on exchangeable lanes modeling

Signal Timing Method of Right——turn Vehicles Based on Mixed Traffic

Shared-use lane assignment and signal timing optimization at intersections with waiting area

Integrated optimization of traffic signals and vehicle trajectories at isolated urban intersections

A real-time traffic control method for the intersection with pre-signals under the phase swap sorting strategy