Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Calculation of Airgap Flux Density in Dual-rotor Radial-flux Permanent Magnet Machines

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Investigation of a Novel Hybrid Less-Rare-Earth Consequent-Pole Interior Permanent Magnet Machine with Asymmetric Rotor

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Design and Performance Analysis of Dual-Stator Brushless Doubly-Fed Machine with Cage-Barrier Rotor

Research on a novel axial-flux magnetic-field-modulated brushless double-rotor machine with low axial force and high efficiency

3D Fast Calculation of Double Stator Axial Flux PM Machines with Ironless Rotor: Experimental Validation

Design of Axial Flux Permanent Magnet Machines with Segmental 2D Finite-Element Method

Investigation of a Novel Radial Magnetic-Field-Modulated Brushless Double-Rotor Machine Used for HEVs

Design and Analysis of a Modular Permanent Magnet Vernier Machine for Electric Vehicle Application

A Novel Axial Flux Stator and Rotor Dual Permanent Magnet Machine

Electromagnetic Performance Analysis of Dual-Three-Phase Dual-Rotor Flux-Switching Permanent Magnet Machines

Calculation Of Flux Linkages Of The Dual-Redundancy Permanent Magnet Brushless Machine From Magnetic Circuit Model To Finite Element Analysis

Analytical Investigation Of The Magnetic-Field Distribution In An Axial Magnetic-Field-Modulated Brushless Double-Rotor Machine

Comparative Analysis of Radial and Axial Flux Permanent Magnet Machine for a Contra Rotating Fan

FEA-Based Design and Comparative Study of Axial Flux Permanent Magnet Machines with Various Topologies

Optimal Design of an Axial Flux Permanent Magnet Motor