Abstract:A klystron is an important vacuum device which is useful in medical linear accelerators because it amplifies the radio-frequency (RF) signals required to produce high-energy particle beams. The properties of the nonlinear input and output dynamics in the klystron circuit arouse distortion in various types of parameters pertaining to the beam voltage, beam current, RF power, and operating frequency from unpredictable external factors. Therefore, low-level RF (LLRF) control systems can facilitate the regulation of the output of the klystron to a desired level. Low-level RF control system of the klystron is designed to stabilize the applied voltage and control the resonance frequency of the cavity of the klystron. In this work, an infallible low-level RF control system, the most suitable for a klystron, is designed to use a beam monitoring and an interlock system with components that include an isolator and a phase shifter. Moreover, with regard to pulse distortion at the flap top at the RF output power, the stability of the RF power pulse at the flap top part was improved somewhat by a variable inductor which controlled the inside of the pulse modulator. In this LLRF control experiment, the pulse modulator generated 140kV-95A and succeeded in generating RF output power of 2.856GHz-6MW level of an S-band klystron. During this process, the efficiency of the RF power was approximately 42∼45% and the pulse repetition rate was 10 Hz. The flattop pulse width was measured and found to be 1 µs.

Uncertain System Modeling of SNS RF Control System

Analysis and Synthesis of the SNS Superconducting RF Control System

SNS LLRF Control System Model Design

Title: EXCESS RF POWER REQUIRED FOR RF CONTROL OF THE SPALLATION NEUTRON SOURCE (SNS) LINAC, A PULSED HIGH-INTENSITY SUPERCONDUCTING PROTON ACCELERATOR

Sns Superconducting Rf Cavity Modeling-Iterative Learning Control

EXCESS RF POWER REQUIRED FOR RF CONTROL OF THE INTENSITY SUPERCONDUCTING PROTON ACCELERATOR

Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator

Dynamic systems modeling of the spallation neutron source cryogenic moderator system to optimize transient control and prepare for power upgrades

Resonance Control Cooling System for a Proto-Type Coupled Cavity Linac

Evaluation of a Superconducting Augmented Rail-Type Electromagnetic Launch System

Design and analysis on switched reluctance motor system using field-circuit coupled method

System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System

Dynamic Model Construction of a Space Thermionic Nuclear Reactor

Low-level RF control of a klystron for medical linear accelerator applications

Preliminary Design of CSNS-II Linac SRF LLRF

Dynamic Separation Model-Based Sliding Mode Control with Adaptive Neural Network Compensators for a Reluctance Actuator Motion System

Modeling and Analysis of Anode Power Supply for ECRH

Uncertainty Modeling and Analysis of the European X-ray Free Electron Laser Cavities Manufacturing Process

Status and future plan of NSRL microwave power system

Symplectic Modeling of Beam Loading in Electromagnetic Cavities

Multi-physics Analysis and Experiment of a CW Four-Rod RFQ