Abstract:When analyzing the dynamic characteristics of marine cables, the static equilibrium state must first be calculated; a dynamic analysis can then be carried out based on the static equilibrium. Since the calculation of the static equilibrium is the basis of dynamic calculation, different methods for the calculation of the static equilibrium will have important impacts on the dynamic response characteristics of cables, which result in cables having different dynamic characteristics. This paper summarizes the research progress in the effects of different methods for the calculation of the static equilibrium on the dynamic response of marine cables during the releasing process, and current methods for their static calculation are more comprehensively developed as well as being more accurate. To study the influence of different static equilibrium calculation methods, with the reference of some specific parameters of a mooring cable, combined with specific sea conditions, through the necessary simplification of the cable releasing process, based on the lumped mass method, mooring cables are discretized into the lumped mass model, and dynamic analysis models of the releasing process of mooring cables under three methods for the calculation of the static equilibriums (the fast static equilibrium calculation method, the analytic catenary calculation method, and the catenary calculation method) are established. The dynamic characteristics of the spatial configurations of mooring cables based on different static equilibrium calculation methods are obtained through time domain coupling analyses. It was found that if the static equilibrium of a cable is calculated, taking into account gravity, buoyancy, wave current resistance, inertia forces, and the axial stiffness of a cable, then the characteristics of a cable during dynamic descent are closest to that of a real situation. The calculation results have a certain guiding significance for specific engineering practices.

Calculation on viscous damping of deepwater catenary mooring line

Influence of Different Static Equilibrium Calculation Methods on the Dynamic Response of Marine Cables during the Releasing Process: Review and a Case Study

Features of Dynamism Wharf-Cable-Dynamic-Positioning Vessel Rigid-Flexible Coupling Multi-Body System Analysis

Influence of changes of Rayleigh damping coefficient on dynamic vibration response of towed cable during rotation process in towed system

Mooring line damping estimation for a floating wind turbine

Development of a numerical mooring line model for a floating wind turbine based on the vector form intrinsic finite element method

Quasi-Static Analysis of the Multicomponent Mooring Line for Deeply Embedded Anchors

Quasi-static Analysis Model of Suction Caisson Mooring Line

Quasi-Static Analysis Of The Multi-Component Mooring Line For Suction Anchors

Experimental Investigation on Responses Characteristics of a Mooring Line with Imposed Top-End Motions

Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line

Prediction of the whole mooring chain reaction to cyclic motion of a fairlead

Investigations on the Mooring Safety Considering the Coupling Effect of the Mooring Line Snap Tension and Anchor Out-of-plane Loading

Coupled analysis between catenary mooring and VLFS with structural hydroelasticity in waves

Performance analysis of the mooring system of a two-module scientific research and demonstration platform

Quasi-static Three-Dimensional Analysis of Suction Anchor Mooring System

The dynamic response analysis of the equivalent water depth truncated point of the mooring line

Numerical Investigations on Load Transfer of Mooring Line Considering Chain–seabed Dynamic Interaction

A fully coupled dynamic water-mooring line system: Numerical implementation and applications

Hydrodynamic Response of Ocean-Towed Cable-Array System under Different Munk Moment Coefficients

Sensivity Analysis of Tensioned–Leg Mooring Line Under Variations of Water Depth