Abstract:The high energy density pulse input into brittle structural materials will propagate as a shock wave. It induces compression fracture and function failure. In this work, voids are introduced to significantly enhance the shock plastic deformability of brittle structural materials, so that brittle structural materials can effectively absorb the shock wave energy, and restrain the propagation of shock-induced cracks. A lattice-spring model is established to investigate the mechanism of shock plastic, and the processes of energy absorbing and crack expanding in porous brittle materials. The shock wave inside porous brittle material splits into an elastic wave and a deformation wave. The deformation wave is similar to the plastic wave in ductile metal, however, its deformation mechanism is of volume shrinkage induced by voids collapse, and slippage and rotation deformation of scattered tiny scraps comminuted by shear cracks. We calculate the shock wave energy based on particle velocities and longitudinal stresses on nine interfaces of the modeled brittle sample, and further obtain the absorbed energy density. The absorbed energy density curve is composed of two stages: the absorbing stage and the saturation stage. The absorbing stage corresponds to the deformation wave, and the saturation stage corresponds to the shock equilibrium state (Hugoniot state). The energy absorb abilities of the dense sample and porous samples with 5% and 10% porosities are compared based on calculation results. It shows that the ability of the porous brittle material to absorb high energy density pulse is much higher than that of the dense brittle material. The ability of porous brittle materials to restrain the propagation of the shock fracture is also explored. The goal of this design is to freeze the propagation of the shock fracture in the middle of the brittle sample, so that the other parts of the sample keep nearly intact during the shock. Inside the protected area, the designed functions of brittle materials can be accomplished without the disturbance of the shock fracture. This design is used under the short pulse loading condition: the rarefaction wave on the rear of the short pulse will catch up and unload the deformation wave if it moves slowly; the deformation wave and the shock fracture propagate synchronously; when the deformation wave is unloaded, the shock fracture will be frozen in the middle of the porous sample. Under the short pulse loading condition, compared with the dense brittle material, whose entire regions are destructed, the porous brittle material can restrain the propagation and impenetration of the shock fracture, with the cost of increasing the damage extent in part of the sample. This is helpful to avoid the entirely function failure of the brittle structural material.

Mesoscopic Picture of Fracture in Porous Brittle Material under Shock Wave Compression

Dynamic Fracture in Brittle Solids at High Rates of Loading

Shock Response and Evolution Mechanism of Brittle Material Containing Micro-Voids

Modeling multiscale evolution of numerous voids in shocked brittle material.

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Macroscopic Shock Plasticity of Brittle Material Through Designed Void Patterns

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Delayed Fracture of Porous Ceramics under Shock-Wave Compression

The Ability of Porous Brittle Materials to Absorb and Withstand High Energy Density Pulse

Shock-induced damage and dynamic fracture in cylindrical bodies submerged in liquid

NUMERICAL INVESTIGATION ONVOID COLLAPSE FOR BRITTLE POROUS MATERIALS SUBJECTEDTO SHOCK LOADING

Modeling of Compression-Induced Splitting Failure in Heterogeneous Brittle Porous,Solids

Fracture of brittle solids under impact: The decisive role of stress waves

Full-Field Quantitative Visualization of Shock-Driven Pore Collapse and Failure Modes in PMMA

Shock Plasticity Design of Brittle Material

Modelling the effects of void swelling and spatial heterogeneity on the fracture of metallic materials by crystal plasticity

Evolution of Preset Void and Damage Characteristics in Aluminum during Shock Compression and Release

Fracture evolution and failure behavior around an opening in brittle jointed rocks subjected to uniaxial compression

Fracture mechanisms of intact rock-like materials under compression

Experimental and numerical study on splitting failure of brittle solids containing single pore under uniaxial compression

Numerical study on full-field stress evolution and acoustic emission characteristics of rocks containing three parallel pre-existing flaws under uniaxial compression