Abstract:Traditional imaging methods often separate the two technical procedures of optical system design and imaging processing, where the lens subsystem is firstly optimized using an optical measure of performance and the image processing subsystem is optimized subsequently, resulting in the failures in efficient cooperation between the optical and digital elements and missing of the optimal solution. Therefore, an innovative approach is presented to combine optical system design and image processing together to obtain high resolution images from the final system. In this paper, the theoretical foundations for this computing optical design method is analyzed by considering the modulation transfer functions (MTF) and aberrations. According to the wave aberration theory and Zernicke formula, the relationship between the point spread function (PSF) and a certain monochromatic aberration can be obtained. Fourier transformation is taken on these PSFs and then modulus value calculation is adopted to get the MTFs. By analyzing the MTFs of idealized optical systems, the influence of each monochromatic aberration on the image can be concluded. Note that some of the MTFs values have zeros and others do not. Considering that imaging processing algorithm cannot recover the information lost at such zeros, thus some aberrations can be easily corrected through imaging processing algorithm, while others not. Aimed at a single monochromatic aberrations respectively, the optical system with single lens is designed in ZEMAX software and the relevant imaging processing algorithm is adopted. From the comparison among the final images, the theoretical foundations for the computing optical design method considering the MTF and aberrations can be verified. The compensation for aberration of imaging processing can be utilized to reduce the pressure of optical system design. The computing optical design method provides a new approach to simplify structure and reduce cost, as well as to gain high resolution images simultaneously, especially for designing certain complex optical system, which shows promising perspective of industrial application.

Generalized Method for Calculating Astigmatism of the Unit-Magnification Multipass System

Approximate Analytic Astigmatism of Unit-Magnification Multipass System.

Generalized Design of A Zero-Geometric-Loss, Astigmatism-Free, Modified Four-Objective Multipass Matrix System

Optical Axis Perturbation Analysis for the Unit-Magnification Multipass System

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Effects of Sinusoidal Mid-Spatial Frequency Surface Errors on Optical Transfer Function

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Optimization of Freeform Cylindrical Lens in Czerny-Turner Spectrometer System to Correct the Astigmatism by Using User Defined Error Function

Calculation of the coupling coefficients for spatial waveguides using the field matching method

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Astigmatism calculation and its correction strategy in White type multipass Cells

A simulation imaging method for actual optical system and results analysis

Simulation Of Aspheric Tolerance With Polynomial Fitting

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Analysis and Calibration of Defocus Detection System Based on Astigmatism Method

Error analysis and processing of partial compensatory aspheric testing system

Compact Optical Multipass Matrix System Design Based on Slicer Mirrors.

Aberration Correction Method for the Catadioptric Imaging System Design.

Aberration Analysis for the Computing Optical Design Method

Residual Aberration Correction Method of the Three-Mirror Anastigmat (TMA) System with a Real Exit Pupil Using Freeform Surface