Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Polypropylene/montmorillonite Nanocomposites Toughened with SEBS‐g‐MA: Structure–property Relationship

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Mechanical and Rheological Properties of PP/SEBS/OMMT Ternary Composites

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

PP-PP-g-MAH-Org-MMT nanocomposites. I. Intercalation behavior and microstructure

Preparation and Properties of Polypropylene/montmorillonite Layered Nanocomposites

Dispersion and Tensile Behavior of Polypropylene/Montmorillonite Nanocomposites Produced Via Melt Intercalation

Structural and Mechanical Behavior of Polypropylene/Maleated Styrene-(Ethylene-Co-Butylene)-Styrene/Sisal Fiber Composites Prepared by Injection Molding

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites

Dispersion, thermal and mechanical properties of polypropylene/magnesium hydroxide nanocomposites compatibilized by SEBS-g-MA

Study of Polypropylene/montmorillonite Nanocomposites Prepared by Solid‐state Shear Compounding (S3C) Using Pan‐mill Equipment: the Morphology of Montmorillonite and Thermal Properties of the Nanocomposites

Ultrasound Assisted Continuous‐mixing for the Preparation of PP/SEBS/OMMT Ternary Nanocomposites

Preparation of Polypropylene/montmorillonite Nanocomposites with an Exfoliated Structure by a Designed Route

How Organo-Montmorillonite Truly Affects the Structure and Properties of Polypropylene

Influences of Compatibilizers on Rheology and Mechanical Properties of Propylene Random Copolymer/styrene‐ethylene‐butylene‐styrene Block Copolymer/organic‐montmorillonite Nanocomposites

Preparation and Properties of Chlorosulfonated Polyethylene/organomontmorillonite Nanocomposites