Abstract:Silicon nanotubes (SNTs) are very attractive in the fields of energy, catalysis, and sensors, but a facile template- and/or catalyst-free preparation method is still absent. Herein, we study a controllable and cost-effective approach for preparing SNTs by electrochemically reducing layer-structured calcium silicate (CaSiO3) in molten CaCl2/NaCl without any template and catalyst. The underlying mechanism of the SNT formation is uncovered: the layer-structured CaSiO3 is first electrochemically exfoliated into SiOx (0 < x < 2) sheets while releasing CaO into the molten salts, and then the SiOx sheets are electrochemically reduced and simultaneously crimped into SNTs. The diameter (120–312 nm) and wall thickness (∼40 nm) of the SNTs can be tailorable by manipulating the reduction potential between −1.28 and −1.48 V (vs Ag/AgCl). Lastly, the electrolytic SNTs show a high lithium storage capacity of 3737 mAh g–1 at 0.2 A g–1, a high rate capability of 1371 mA h g–1 at 10 A g–1, and stable cycling with a capacity of 974 mAh g–1 after 600 cycles at 1 A g–1. Overall, the template- and catalyst-free electrochemical method provides a straightforward and facile way to prepare SNTs with a brand-new mechanism that can be applied to other tubular structure materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07031?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07031</a>.TEM image, SAED, and EDS of CaSiO3 electrolyzed at −1.1 V for 12 h; XRD patterns of the quartz substrate that holds the samples; SEM images and Raman spectrum of electrolytic products at −1.39 V for 12 h; SEM images of the electrolytic products at −1.35 V for 12 h; SEM image of the electrolysis product of silica particles; SEM images and EDS spectrum of samples prepared at −1.39 V for 3 and 6 h; CV curves of the SNT electrode; cycling performance of commercial SNPs; cycling performance of commercial SNPs; SEM images of SNT and SNP electrodes before and after cycling; charge/discharge profile and cycling performance of the SNTs||LCO full cell at 1 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07031/suppl_file/am1c07031_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Insulator Nanocapillary Production from Biological Sample

Nano-structured polymer-silica composite derived from a marine diatom via deactivation enhanced atom transfer radical polymerization grafting.

Oligomer Duplex Tearing and Shearing Mechanisms in the Nanopore

Microstructure and Properties of In-Situ Prepared Cellulosic Biomass Carbon Based Diatomite Composite

Silica diatom shells tailored with Au nanoparticles enable sensitive analysis of molecules for biological, safety and environment applications

Complex-shaped microbial biominerals for nanotechnology

Diatom Biosilica Functionalised with Metabolically Deposited Cerium Oxide Nanoparticles

Preparation and Characteristics of Biosilica Derived from Marine Diatom Biomass of Nitzschia Closterium and Thalassiosira

Micro-Arraying of Nanostructured Diatom Microshells on Glass Substrate Using Ethylene-Vinyl Acetate Copolymer and Photolithography Technology for Fluorescence Spectroscopy Application

Three-dimensional Fabrication and Characterisation of Core-Shell Nano-Columns Using Electron Beam Patterning of Ge-doped SiO2

Influence of Baking and Acid Cleaning on the Morphology and Composition of Diatom Biosilica

Visualization of the internal structure of Didymosphenia geminata frustules using nano X-ray tomography

Artificial Ceramic Diatoms with Multiscale Photonic Architectures Via Nanoimprint Lithography for CO2 Photoreduction

Purification of biosilica from living diatoms by a two-step acid cleaning and baking method

Computational analysis of the effects of nitrogen source and sin1 knockout on biosilica morphology in the model diatom Thalassiosira pseudonana

Modifying the thickness, pore size, and composition of diatom frustule in Pinnularia sp. with Al3+ ions

Culturing and Bonding of Diatom on a Microfluidic Chip for Biosensing Application

Fabricating Silicon Nanotubes by Electrochemical Exfoliation and Reduction of Layer-Structured CaSiO 3 in Molten Salt

Synthesis of Porous Silicon Nitride Ceramics from Diatomite

Porous Silicon Nitride Ceramics Prepared by Reduction – Nitridation of Diatomite

The potential of diatom nanobiotechnology for applications in solar cells, batteries, and electroluminescent devices