Abstract:The science and technology of catalysis are of central practical importance. About 80% of all industrial chemicals are manufactured by utilizing (heterogeneous) catalysis. Besides activity and selectivity, catalyst deactivation during use is a key issue in practical catalysis. “The importance of understanding and being able to predict loss of activity during catalyst usage must not be under-estimated” since replacement of a catalyst means high operational costs. Industrially used catalysts are, however, far too complex to allow for a microscopic understanding of why a catalyst deactivates. This knowledge calls rather for the use of model catalysts (such as single-crystalline surfaces) and their investigations under well-controlled ultrahigh vacuum conditions. The trade off for this so-called surface-science approach is the introduction of a pressure and a materials gap by which catalytic properties determined under well defined conditions may not be extrapolated to those at realistic reaction conditions. For a ruthenium-based catalyst, activity loss was reported for the CO oxidation reaction. In particular, under oxidizing reaction conditions the activity of supported ruthenium catalysts declines substantially. This finding has been quite puzzling as recent investigations clearly indicate that RuO2 is much more active than ruthenium in the oxidation of CO. Since the pressure and materials gap for the CO oxidation over ruthenium are considered to be bridged we can utilize the surface-science approach to clarify the microscopic processes determining the structural deactivation of ruthenium-based catalysts and how this atomic-scale knowledge is used to optimize the performance of practical ruthenium catalysts. We concentrate herein mainly on polycrystalline RuO2 powder which is calcined at 573 K, resulting in a specific surface area of 0.9 m g . Complementary data of supported ruthenium catalysts are provided in the Supporting Information. The mean diameter of the particles in the RuO2 powder is about 1 mm. Therefore RuO2 powder represents a natural link between single–crystal ruthenium model catalysts and ruthenium catalysts supported on SiO2 or MgO with an active surface area of 10 m g . Applied partial pressures of CO and O2 are in the range of 5–35 mbar. Figure 1a displays the conversion of CO over oxidized RuO2 polycrystalline powder as a function of time on stream, using a stepwise temperature variation and a CO/O2 feed

Co Oxidation on Ruthenium: the Nature of the Active Catalytic Surface

Reply to Comment on "co Oxidation on Ruthenium: the Nature of the Active Catalytic Surface" by H. Over, M. Muhler, A.P. Seitsonen

Mechanism for the High Reactivity of CO Oxidation on a Ruthenium–oxide

Oxidation of Platinum Surfaces and Reaction with Carbon Monoxide

Understanding the structural deactivation of ruthenium catalysts on an atomic scale under both oxidizing and reducing conditions.

Structure Sensitivity in Oxide Catalysis: First-Principles Kinetic Monte Carlo Simulations for CO Oxidation at RuO$_2$(111)

Composition and structure of the RuO2(110) surface in an O2 and CO environment: implications for the catalytic formation of CO2

Thermodynamics and Catalytic Activity of Ruthenium Oxides Grown on Ruthenium Metal from a Machine Learning Atomic Simulation

Anomalous Behavior of Ru for Catalytic Oxidation: A Theoretical Study of the Catalytic Reaction CO + 1/2 O_2 --> CO_2

Operando identification of site-dependent water oxidation activity on ruthenium dioxide single-crystal surfaces

Design, Identification, and Evolution of a Surface Ruthenium(II/III) Single Site for CO Activation

Highly active surfaces for CO oxidation on Rh, Pd, and Pt

Kinetics and Active Surfaces for CO Oxidation on Pt-Group Metals under Oxygen Rich Conditions

CO oxidation on Pd(100) at technologically relevant pressure conditions: A first-principles kinetic Monte Carlo study

Theoretical Studies of CO Oxidation with Lattice Oxygen on Co3O4 Surfaces

A new insight into the initial step in the Fischer–Tropsch synthesis: CO dissociation on Ru surfaces

CO Oxidation on Pt-Group Metals from Ultrahigh Vacuum to Near Atmospheric Pressures. 1. Rhodium

First-principles kinetic Monte Carlo simulations for heterogeneous catalysis, applied to the CO oxidation at RuO2(110)

CO oxidation on Pd(100) vs. PdO(sqrt5xsqrt5)R27^o: First-Principles Kinetic Phase Diagrams and Bistability Conditions

CO oxidation at Pd(100): A first-principles constrained thermodynamics study

Deciphering dynamic surface of PtRu alloy nanocatalysts to revisit their synergistic effects during the electrooxidation