Abstract:The salt lake brines that lithium is extracted from have high chloride levels making the brine very corrosive to stainless steel extraction column internals. This is a significant problem in column scale-up to industrial production. Two types of corrosion-resistant ceramic internals, the hybrid ceramic internal and ceramic plate, were designed and tested under pilot conditions for future industrial application in this field. The hydrodynamic results (Yi et al. Ind Eng Chem Res 56(4):999–1007 (2016), [1]) show that holdup of hybrid ceramic internal is higher than that of ceramic plate by around 50%, while Sauter mean diameter when using the hybrid ceramic internal is smaller than when using the ceramic plate by around 30%. This results in a larger mass transfer area, hence better mass transfer efficiency for the hybrid ceramic internal. Axial dispersion and mass transfer parameters are also examined (Yi et al. Ind Eng Chem Res 56(11):2049–3058 (2017), [2]). The results show that the column with hybrid ceramic internals has 50% lower axial dispersion coefficient and 50% higher mass transfer coefficient, leading to higher mass transfer efficiency. The transfer unit height of the column using hybrid ceramic internals can be as low as 0.2 m, showing very good efficiency. This is promising for near-future applications. Two-phase computational fluid dynamics (CFD) models have been developed for the two columns with ANSYS FLUENT commercial software. CFD successfully predicts the higher holdup and lower axial dispersion coefficients for the hybrid sieve plate pulsed column as measured in the experiments, and the cause for the difference in performance has been explained with information from CFD.

A Novel Cross-Flow Cascade Packed Column Design and Simulation

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

CFD simulation of bubble column with vertical bundle internals

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Pressure drop for two phase counter-current flow in a packed column with a novel internal

Experimental and CFD analysis of two-phase cross/countercurrent flow in the packed column with a novel internal

Development of a novel catalytic distillation column

Liquid Holdup for Two-Phase Countercurrent Flow in the Packed Column with a Novel Internal

A Novel Quasi-3D Method for Cascade Flow Considering Axial Velocity Density Ratio

Progresses of study and application on extraction columns

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Study on the hydromechanics of novel catalytic distillation columns

Mass Transfer Study and Combined Model for a Karr Column

Experimental research and numerical analysis for effect of drainage structure on separation performance and the "blockage" of fluid in nozzle

Three-dimensional Computational Fluid Dynamics Modeling of Two-phase Flow in a Structured Packing Column

Hydrodynamics And Mass Transfer In A New Type (Fg) Stack Packed Extraction Column

Experimental Study and CFD Simulation of a Solvent Extraction Pulsed Column with Novel Ceramic Internals