Abstract:In this paper, the passivation kinetics of AA2098-T851 was investigated by a fundamental theoretical interpretation of experimental results based on the mixed potential model (MPM). The steady state passive layer formed on the AA2098-T851 in NaHCO3 solution in a CO2 atmosphere upon potentiostatic stepping in the anodic direction followed by stepping in the opposite direction was explored. Potentials were selected in a way that both anodic passive dissolution of the metal and hydrogen evolution reaction (HER) occur, thereby requiring the MPM for interpretation. Optimization of the MPM on the experimental electrochemical impedance spectroscopy (EIS) data measured after each potentiostatic step revealed the important role of the migration of Al interstitials in determining the kinetics of passive layer formation and dissolution. More importantly, it is shown that the inequalities of the kinetics of formation and dissolution of the passive layer as observed in opposite potential stepping directions lead to the irreversibility of the passivation process. Finally, by considering the Butler-Volmer (B-V) equation for the cathodic reaction (HER) in the MPM, and assuming the quantum mechanical tunneling of the charge carriers across the barrier layer of the passive film, it was shown that the HER was primarily controlled by the slow electrochemical discharge of protons at the barrier layer/solution (outer layer) interface.

The Potentiostatic-Galvanostatic Transient Response Character of a Passive System with Adsorption

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

New diffusive interface model for pitting corrosion

A 2-D Reaction-Transport Model for Investigating Pit Morphology Under the Influence of a Salt Film

Influence of Potentionstatic Pulse Technique on Pitting Behavior and Pitting Resistance of 317L Stainless Steel

Use of the Potentiostatic Pulse Technique to Study and Influence Pitting Behavior of 317L Stainless Steel

The Electrochemical and Morphological Characteristics of Single Metastable Pit for 304 Stainless Steel under Potentiostatic Polarization

On The Linear Response Of A Passivated Metallic Electrode To Potential Step Perturbation

Analytical Modeling for Transient Probe Response in Pulsed Eddy Current Testing

Investigation on the Transient Current Response to Potential Pulse for an Electrochemical System with High Impedence

Studies on Pitting Corrosion of Al-Cu-Li Alloys Part III: Passivation Kinetics of AA2098-T851 Based on the Point Defect Model

Localized corrosion: Passive film breakdown vs. Pit growth stability, Part VI: Pit dissolution kinetics of different alloys and a model for pitting and repassivation potentials

Effect of Inhibitors on the Critical Pitting Temperature of the High-Entropy Alloy Co1.5CrFeNi1.5Ti0.5Mo0.1

The Temperature-Dependent Pitting and Repassivation Behaviors of UNS S31803 Duplex Stainless Steel in Chloride Solutions

Pitting Inhibition of Newly Developed Lean Duplex Stainless Steel 2002 in NaCl Solution by a Green Inhibitor

Application of Potentiostatic Pulse Technique and Statistical Analysis in Evaluating Pitting Resistance of Aged 317L Stainless Steel

Determination of Pitting Initiation of Duplex Stainless Steel Using Potentiostatic Pulse Technique

Investigation on Pitting Resistance of Sn-containing Ferritic Stainless Steel with Solution Simulation Method

Dependence of Critical Pitting Temperature on the Concentration of Sulphate Ion in Chloride-Containing Solutions

Metastable Pitting and Its Correlation with Electronic Properties of Passive Films on Sn–xZn Solder Alloys

Electrochemical Modeling of GITT Measurements for Improved Solid-State Diffusion Coefficient Evaluation