Abstract:The electrochemical method is an attractive alternative to other methods of wastewater treatment because of its environmental respectability and ease of operation. This study introduces the application of the electrochemical method for treatment of domestic and industrial wastewater.Electrochemical degradation of phenol was evaluated at two typical anodes, Ti/RuO2-Pt and Ti/IrO2-Pt, as a treatment method in toxic aromatic compounds discharged by chemical plants, petroleum refineries and pharmaceutical factories. According to the results, the electrochemical process for effective removal of phenol and ammonium was achieved in the presence of NaCl, in which phenol could be readily mineralized. For electrochemical reduction of nitrate, the Cu-Zn alloy cathode and the Ti/IrO2-Pt anode were used in an undivided cell. The Cu-Zn alloy cathode has a significant capacity of electrochemical reduction of nitrate. Under the conditions of 10mA/cm(2), addition of 500 mg/L NaCl and the parallel connection, the nitrate-N decreased from 50.0 mg/L to 9.8 mg/L for the 240-min electrolysis. Neither ammonia-N nor nitrite-N was detected at the end of electrolysis.Moreover, a series of experiments were performed with two types of practical electrochemical treatment systems (treatment capacities of 4m(3)/hr and 0.5m(3)/hr) using effluents from an anaerobic digester (EAD) of cattle wastewater, supernatants from primary sedimentation in a sewage plant (SPS) and domestic wastewater to evaluate the systems' treatment abilities. As a result, for both EAD and SPS, the 4 m(3)/hr system was found to remove 87 to 91% of T-P, 74 to 96% of T-N, 70 to 94% of NH4-N, 88 to 91% of TOC and 75 to 87% of COD. Similarly, the 0.5 m(3)/hr system was able to remove 62 to 90% of T-P, 83 to 92% of T-N, 90 to 100% of NH4-N, 75to 83% of TOC and 80 to 100% of COD. On the other hand, a pilot plant of an electrochemical treatment system (0.3 m(3)/hr) was successfully developed by treating domestic wastewater, pond water containing algae and wastewater from hog raising, in which electrocogulation and electrooxidation processes were used. In this system, the removal of T-N, T-P, NH4-N and COD from domestic wastewater and pond water containing algae was approximately 90%, while the removal of chlorophyll-a (chl-a) of algae was approximately 100%.

Methods for Treating Strong Chelate-Containing Wastewater Part Ⅲ——Ultraviolet Oxidation/degradation Process for Chelate-Containing Wastewater Treatment

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

A Combined Electrocoagulation-Electrooxidation Treatment on Ctmp Wastewater

Methods for Treating Strong Chelate Wastewater Part Ⅰ——Effective Techniques and Methods for Treating Chelate Wastewater

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

DEGRADATION OF CHELATING Cu(Ⅱ)-ETHYLENEDIAMINETETRAACETIC ACID WASTEWATER AND ITS REACTION MECHANISM BY TOURMALINE/H2O2 SYSTEM

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

EDTA Degradation by UV/Chlorine Treatment: Efficiency, Formation of Oxidation Byproducts and Toxicity Evaluation

Methods for Treating Strong Chelate-Containing Wastewater PartⅡ——Chelation/precipitation Process for the Treatment of Mixed Electroplating Wastewater

Practical advanced oxidation processes for wastewater treatment：II. the principles, characteristics, and application effectiveness of several industrialized advanced oxidation equipments

Practical advanced oxidation processes for waste water treatment：I. the principle, characteristic, advantage and disadvantage of various advanced oxidation technologies

Treatment of simulated electroplating wastewater containing Ni(II)-EDTA by Fenton oxidation combined with recycled ferrite process under ambient temperature

An Efficient, Green, and Residual Oxidant-Free Wastewater Treatment Technique Enabled by Coupling a Dual-Cathode Heterogeneous Electro-Fenton Process and UV Radiation in Tandem

Electroplating waste water treatment method

Autocatalytic Decomplexation of Cu(II)-EDTA and Simultaneous Removal of Aqueous Cu(II) by UV/Chlorine

Efficient Treatment of an Electroplating Wastewater Containing Heavy Metal Ions, Cyanide, and Organics by H2o2 Oxidation Followed by the Anodic Fenton Process

Fenton/ozone-based oxidation and coagulation processes for removing metals (Cu, Ni)-EDTA from plating wastewater

Efficient removal of Cu-EDTA complexes from wastewater by combined electrooxidation and electrocoagulation process: Performance and mechanism study

Electrochemical Technology Applied In Treatment Of Wastewater And Groundwater