Study on Fault Diagnosis Method of Key Components of the Gearbox under Variable Working Conditions Based on Improved VMD Algorithm
Tongtong Liu,Yanliang Wang,Lingli Cui,Chao Zhang
DOI: https://doi.org/10.1007/978-3-031-26193-0_8
2023-01-01
Abstract:Gearboxes are critical components of many engineering systems, they are widely used because of their advantages, such as being small, large transmission ratio, bearing capacity, and long life. However, the gearbox working conditions are complex, their working environment is harsh, the fault is difficult to identify, and the whole machine equipment structure is complex, once a fault is not easy to troubleshoot. The fault may lead to the overall shutdown, resulting in substantial economic losses, and may cause production accidents, and threats to the lives of site staff. Therefore, the fault diagnosis of key components of the gearbox has been an important research topic. Many researchers have contributed to the dynamic modeling, fault diagnosis, and state monitoring of gearboxes. Most of these methods are developed for processing the vibration signals under stationary conditions, but they may not be suitable for the analysis of the vibration signals under non-stationary conditions. To address these issues, this paper presents a signal processing scheme of the gearbox with variable speed based on adaptive order analysis and an improvedVMDalgorithm. In this paper, an optimal selection method of VMD parameters is proposed. Firstly, the angular domain resampling of the variable speed signal is carried out by using the improved order analysis method, and the equivalent constant speed signal is obtained. Secondly, the optimal parameter combination of VMD decomposition is calculated for the resampled signal. Finally, the resampled signal is decomposed by VMD to obtain its fault characteristics. Simulation and experimental vibration signals are employed to evaluate the effectiveness of the proposed method. The results show that this method can effectively identify the fault signal of the gearbox with variable speed, it verified that the method is effective.