Abstract:As an important load-bearing component, wire rope is widely used in engineering structures. It is significant to conduct nondestructive testing on the wire rope and ensure its safe operation. The magnetic signal inspection based on the self-magnetic flux leakage (SMFL) effect can effectively identify the location of defects. However, the current research on the magnetic signal of defects with the influence of various factors is insufficient. Based on the SMFL inspection of defective steel wire under tensile load, it puts forward an approach to evaluate the defect through the peak-valley value of the normal component H p ( y ) of the magnetic signal. Then the numerical simulation of force-magnetic coupling with COMSOL Multiphysics is conducted. Finally, the additive model is applied to analyze the factors affecting the magnetic characteristic parameters. The results show that the peak-valley values of H p ( y ) with different sizes of defects increase first and then decrease with the increase of load, which can be used to evaluate the stress state of the defective steel wire; According to the nonlinear force-magnetic coupling model based on the thermodynamic relation under the constant weak magnetic field, the SMFL field of the defective steel wire is calculated through the magnetization constitutive relationship using the representative stress of the refined domains at the defect; By comparing and verifying the results simulated and experimental, the additive model is further introduced to quantitatively analyze the magnetic signal of the defect considering the combined action of the defect depth h , the defect width w and the external load F . The defect depth h has a significant influence on the magnetic signal characteristics, which can be estimated by the additive model with determined w and F . This study is expected to provide some references for the quantitative analysis of defects under loading.

Magnetic Flux Leakage of Typical Defect of Wire Rope Based on FE Simulation

Research on the force-magnetic coupling of steel wire and defect evaluation based on self-magnetic flux leakage effect

Quantitative Method for Defect Surface Area of Wire Rope Based on Circumferential Magnetic Flux Leakage Image

Instantaneous Lift-off Distance Estimation in Magnetic Flux Leakage Testing of Steel Wire Ropes

Analysis of the Eccentric Problem of Wire Rope Magnetic Flux Leakage Testing

Magnetic Flux Leakage Testing of Wire Rope Defects with Denoising

Quantitative Detection of Local Flaw under the Lift-Off Effect for Steel Wire Ropes

Simulation analysis and experimental investigation of wire rope leakage magnetic field detection

Numerical Simulation on Magnetic Flux Leakage Testing of the Steel Cable at Different Speed Title

Characterization of Wire Rope Defects with Gray Level Co-Occurrence Matrix of Magnetic Flux Leakage Images

A New Method of Defects Identification for Wire Rope Based on Three-Dimensional Magnetic Flux Leakage

Detecting and Locating Local Flaws Based on Magnetic Flux Leakage Imaging for Wire Ropes

A Simplified Calculation Model of MFL Signal of Defect Based on Lift-off Value

Fault Diagnosis of Steel Wire Ropes Based on Magnetic Flux Leakage Imaging Under Strong Shaking and Strand Noises

Study on Algorithms of Wire Rope Localized Flaw Quantitative Analysis Based on Three-Dimensional Magnetic Flux Leakage

Wire Rope Defects with the Micro-magnetic NDT Technology

Evaluation of the Size of a Defect in Reinforcing Steel Using Magnetic Flux Leakage (MFL) Measurements

Fractal Dimension Algorithm for MFL of Corrosion Damage in Wire Rope

Online Nondestructive Testing for Fine Steel Wire Rope in Electromagnetic Interference Environment

Fast Quantitative Method to Detect the Cross-Sectional Loss of Wire Rope Defects

Multi-parameter Simulation Neural Network Algorithm for Wire Rope MFL Detection