Abstract:Adsorption removal of Cu (II) and Pb (II) on cross-linked chitosan/Al-13-pillared montmorillonite (CCPM) was examined in solutions. The chitosan dosage was drastically reduced in the new nanocomposite, which is made from the treated clay (Al-13-pillared montmorillonite). Several important parameters that influenced the adsorption of Cu (II) and Pb (II) ions, such as cross-linked chitosan-to-clay ratio, pH, temperature, initial concentration, dosage, and contact time effect, were systematically investigated. Result showed that in the nanocomposite with cross-linked chitosan-to-clay ratio of 0.45:1, the maximum removal efficiencies of Cu (II) [pH 6.5, dosage 10 g/L, initial Cu (II) concentration 100mg/L, contact time 2 h, 298 K] and Pb (II) [pH 6.0, dosage 5g/L, initial Pb (II) concentration 100mg/L, contact time 2 h, 298 K] were 96.0% and 99.5%, respectively. Kinetic and isotherm studies have indicated that the adsorption process of Cu (II) or Pb (II) nanocomposites was better fitted by the pseudo-second-order equation and the Freundlich equation, with chemical adsorptions as the rate-limiting step. The metal-ion affinity to the functional groups of CCPM followed the order Pb (II) > Cu (II). The thermodynamic parameters Delta H and Delta S values showed that the sorption process of Cu (II) or Pb (II) was spontaneous (Delta G<0), was endothermic (Delta H<0), and had decreased entropy (Delta S<0). HNO3 (0.1 M) could be a good desorbent in the recovery of metal ions after adsorption and regeneration of the adsorbent.

Preparation of porous chitosan gel beads for copper(II) ion adsorption.

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Copper adsorption on chitosan–cellulose hydrogel beads: behaviors and mechanisms

Simple method for preparation of chitosan/poly(acrylic acid) blending hydrogel beads and adsorption of copper(II) from aqueous solutions

Chitosan/Poly(maleic acid- alt-vinyl acetate) Hydrogel Beads for the Removal of Cu2+ from Aqueous Solution

Enhanced and selective adsorption of copper(II) ions on surface carboxymethylated chitosan hydrogel beads

Microfluidic Preparation of Chitosan Microspheres with Enhanced Adsorption Performance of Copper(Ii)

Preparation of ion-imprinted montmorillonite nanosheets/chitosan gel beads for selective recovery of Cu(II) from wastewater

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

New crosslinked-chitosan graft poly(N-vinyl-2-pyrrolidone) for the removal of Cu(II) ions from aqueous solutions

Preparation and Adsorption Ability of Polysulfone Microcapsules Containing Modified Chitosan Gel

Spherical Polystyrene-Supported Chitosan Thin Film of Fast Kinetics and High Capacity for Copper Removal

Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

3D Porous Tubular Network-Structured Chitosan-Based Beads with Multifunctional Groups: Highly Efficient and Selective Removal of Cu2+

Preparation of polyamidoamine dendrimer-functionalized chitosan beads for the removal of Ag(I), Cu(II), and Pb(II)

Preparation, Characterization, and Adsorption Properties of Chitosan Microspheres Crosslinked by Formaldehyde for Copper (II) from Aqueous Solution

Preparation and characterization of porous chitosan–based membrane with enhanced copper ion adsorption performance

Facile fabrication of magnetic chitosan beads of fast kinetics and high capacity for copper removal.

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material

Ion Imprinted Sodium Alginate Hydrogel Beads Enhanced with Carboxymethyl Cellulose and β-Cyclodextrin to Improve Adsorption for Cu2+

Removal of Copper and Lead from Aqueous Solution by Adsorption Onto Cross-Linked Chitosan/Montmorillonite Nanocomposites in the Presence of Hydroxyl–Aluminum Oligomeric Cations: Equilibrium, Kinetic, and Thermodynamic Studies