Abstract:The phase separation of poly(methyl methacrylate)/poly(vinyl acetate)/silica (PMMA/PVAc/SiO2) blends was investigated by optical microscope, rheology, morphological observation and Fourier transform infrared spectroscopy. Strong inter-molecular interaction between PMMA and PVAc was found by the shift of the carbonyl peak position compared to the FTIR of pure polymer and the reduction of chain entanglements inferred from the rheological curves. The addition of nano-silica led to the adsorption of chains of both polymers on the particle surfaces, which changed the inter-molecular interaction between pure PMMA and PVAc. The complex inter-molecular interaction and polymer-particle interaction resulted in the failure of time-temperature superposition over the entire temperature range. So the normalized Cole-Cole plot was proposed to analyze the phase separation process of the blend. Due to the inter-molecular interaction, the normalized Cole-Cole plot of the PMMA/PVAc blend deviates from the polymer, and secondary deviation occurs at the end of the curve during the heating process, which is the contribution of the phase interface. The nanoparticles have different influences on the phase separation behavior of the blend, depending on the blend composition. In the near-critical blends, nano-silica promoted the phase separation and was finally located at the interface of the two phases. In the off-critical blends, nano-silica had little effect on phase separation and was finally located in the island domains. The effect of nanoparticles on phase separation of different blends is related to the mechanism of phase separation: the near-critical blends form discontinuous shapes through the decomposition of the spiral nodal line. The phase separation speed is faster than the Brownian motion speed of nanoparticles, which results in the initial distribution of nano-silica in the two phases, and the subsequent movement towards the interface of two phases. The off-critical blends form island shapes through nucleation growth mechanism. Due to the slow phase separation rate, the nano-slica play the role of nuclei during the phase separation. In other words, the phase separation mechanism, Broenian motion of nanoparticles and dynamic adsorption and desorption of polymer chains on the surface of nanoparticles jointly determine the distribution of nanoparticles. Such selective location of nanoparticles determined by the phase separation mechanism supplied a new approach for the control of aggregation of nanoparticles in polymers. [GRAPHICS] .

Influence of Clay on the Morphology and Phase Separation Behavior of Poly(Methyl Methacrylate)/Poly(Styrene-Co-Acrylonitrile) Blends

Effect of Nanoclay on the Phase Separation Behavior of Poly（methyl Methacrylate）/poly（vinyl Acetate） Binary Polymer Blends

Influence of Clay and Predispersion Method on the Structure and Properties of Polystyrene (ps)‐clay Nanocomposites

Effects of selective distribution and migration of poly(methyl methacrylate)-grafted nanoclays on the phase behavior of poly(methyl methacrylate)/poly (styrene-co-acrylonitrile) blends

Selective location and migration of poly(methyl methacrylate)- grafted clay nanosheets with low grafting density in poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation

Phase Separation Of Poly(Methyl Methacrylate)/Poly(Styrene-Co-Acrylonitrile) Blends With Controlled Distribution Of Silica Nanoparticles

Phase separation of poly (methyl methacrylate) / poly (styrene-co- acrylonitrile) blends in the presence of silica nanoparticles

Filler Effects on the Phase Separation Behavior of Poly (methyl Methacrylate)/poly (Styrene-Co-acrylonitrile) Binary Polymer Blends

Influence of Polarity on the Preferential Intercalation Behavior of Clay in Immiscible Polypropylene/Polystyrene Blend

Morphology, Thermal and Mechanical Properties of Poly (Styrene-Acrylonitrile) (SAN)/Clay Nanocomposites from Organic-Modified Montmorillonite

PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY AND ITS EFFECT ON THE THERMAL DEGRADATION IN IMMISCIBLE PP/PS BLENDS

Manipulating the phase morphology in PPS/PA66 blends using clay

Phase Separation Behavior of Poly(methyl methacrylate)/Poly(vinyl acetate)/Silica Blends

Phase behavior of blends of poly (vinyl methyl ether) with styrene-acrylonitrile in film

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/butadiene (core) Styrene Acrylonitrile-G-Maleic Anhydride (shell) Latex/Organoclay Ternary Nanocomposites

A HIGH RESOLUTION SOLID-STATE NMR STUDY OF MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF CRYSTALLINE POLY(METHYL METHACRYLATE)(PMMA) WITH POLY (STYRENE-ACRYLONITRILE)(SAN) BLENDS

STUDY ON PHASE-SEPARATION OF PMMA/SAN BLENDS INDUCED BY GLASS BEADS THROUGH DYNAMIC RHEOLOGICAL MEASUREMENTS

Understanding the influence of configurations and intermolecular interaction on thermomechanical and dynamics properties of polymer–clay nanocomposites via molecular dynamics simulations

EFFECT OF PHASE SEPARATION ON DYNAMIC VISCOELASTICITY OF POLY (METHYL METHACRYLATE)/POLY (Α-Methylstyrene-co-acrylonitrile) BLENDS