Abstract:Stealth technology encompasses various techniques to minimize the detection of acoustic, visual, infrared, and electromagnetic (EM) wave signals. Specifically, to minimize the radar cross section (RCS) of the radar system, radar-absorbing structures (RAS) capable of absorbing EM waves are essential. RAS composed of composites can be damaged, and both their structural and EM performances become important issues in RAS studies. Therefore, in this study, EM wave interactions in damaged specimens were evaluated and visualized using a scanning free-space measurement (SFM) system. First, the change in the EM performance due to damage was analyzed using Al-alloy 6061 and Teflon specimens. When the damage size was less than one-half wavelength (30 mm and 20 mm) in both the X (8.2~12.4 GHz) and Ku (12.4~18 GHz) bands, the return loss of Al-alloy 6061 was close to 0 dB and the real part of the permittivity was between 2 and 2.1. On the other hand, when the damage size was more than one-half wavelength, the EM performance in terms of the return and insertion loss and the EM properties of the material (such as the permittivity) were changed in both Al-alloy 6061 and Teflon specimens. Second, a nickel fiber-based RAS with lightning strike-induced damage was also tested by the SFM system, and a behavior similar to that of non-stealth specimens was observed. The RAS was also tested by a pulse-echo ultrasonic propagation imager (PE-UPI) system to investigate the internal damage induced by the lightning strike. Much larger delaminations than the penetration occurred at different plies of the RAS. Eventually, it was found that not only the penetration damage but also the delaminations predominantly affected the EM performance, which caused the overall stealth degradation.

Damage Study of HPM to SF-LFM Guidance Radar

Researches on Laser Damage Resistance of Optical Films

Specific Absorption Rate (Sar) Evaluation Of Human Body Model In The Presence Of Radar Wave Radiation On A Warship Deck

Characterization Of Emi Effects In Communication Data Link System In The Presence Of High-Power Radar Radiation

The Validation of the Simulated HIRF Effects in Metallic Cases Using Parallel FDTD Solver on a High Performance Computer

Functional Damage Assessment Method for Preformed Fragment Warheads to Evaluate the Effect on the Phased-Array Antenna

Application of High Power Microwave Weapons in Air Defense

Analysis on Feasibility of High Power Microwave Weapons Attacking Satellite Payload

Construction and transmission mechanism of exterior ballistics of high-power microwave weapons

Research on high power microwave weapons

Study on Countermining GPS with High Power Microwave Weapon

Investigation of the damage effect on electromagnetic performance evaluation of a radar absorbing structure

Development of the Plasma Limiter for High Power Microwave Weapon Protection

Research on New Technology on Protection of Electronic Systems from High Power Electromagnetic Pulse

Numerical Simulation of High Power Microwave Coupling to Typical Individual Inertial Device

Simulation Analysis of Dynamic Damage Probability Modelling for Laser Systems

Research on guided wave propagation characteristics of quartz ceramic thermal protection structure for ablation monitoring

Numerical simulation of waveguide plasma limiter under high power microwave based on the SETD method

Experimental Study of Destructive Effects on Materials with Different Energy Electron Bombardment

Measurement of High-Power Microwave Impulse Response Characteristics of Reflector Materials

Quantification of damage expansion influence on frequency response function of plate for structural health monitoring with integral differential method