Application of Laser in Surface Technology —An Overview of the Research Work Performed in SKLT

Olivier Marty,Ray J. Amirault

DOI: https://doi.org/10.1007/978-3-642-03653-8_267

2009-01-01

Abstract:Since its discovery in 1960, laser has been widely used in many fields due to its advantages like directivity, monochromaticity, coherence and etc.. When a laser beam interacts with material surfaces, various effects could be obtained depending on the types and the working parameters of the laser used. Geometric property and micro-structure of surfaces could be changed, material ablation and other surface effects could be caused. In this presentation, an overview of the research work on laser surface modification recently performed in the State Key Laboratory of Tribology at Tsinghua University was given. Microstructure of laser treated steel was investigated. A soft band between the melted zone and the transformation hardened zone was detected, and the formation mechanism was analyzed. Aiming at obtaining a smoother surface, experimental investigation on laser polishing was carried out and influence of laser processing parameters on surface morphology of tool steel was studied. Taking into account the original surface morphology, a model of laser polishing of metallic materials was developed based on the theory of heat transfer and experimental results. Progress in laser assisted thin film deposition technique (laser induced arc deposition) was introduced. With the improved technique, film thickness could be controlled very precisely. Multi-layer films used as film sensor were deposited. A method of laser surface modification was presented, by laser induced chemical reactions, suraface textures could be formed and meanwhile, desirable new substances could also be produced in the laser irradiated zone. Textures were produced on the surface of Ti in the environment of nitrogen gas and ammonia gas, respectively. Results of experiment and analysis showed that TiN was formed in the textured area due to the laser induced chemical reaction, which significantly improved the anti wear property of Ti surface. A method newly developed for laser surface texturing based on optical fiber focusing was also introduced. Using the mehod, surface textures of micrometer scale were produced. Research work on laser cladding of quasi-crystalline coatings and laser re-melting of plasma sprayed ceramic coatings was presented. Examples of development of industrial products based on the application of laser were also introduced. Prospect of laser application in surface technology was made. Laser is an important and effective tool in surface modification. Being combined with other methods, laser could find its role in developing new techniques of surface modifications.