Abstract:For a wind energy system, main speed-increasing gearboxes, pitch drives and yaw drives are composed of a multistage planetary gear system. However, inevitable errors in the manufacturing and assembling of the gears lead to uneven load of distribution in the planetary gear system; thus, its service life and reliability decrease greatly, which would eventually affect the normal operation of the whole wind power system. In this study, a dynamic load sharing model of pitch drive is established with a lumped-parameter method. Given the manufacturing and assembly errors and central floating gear, the dynamic equations for each component, the stiffness matrix and damping matrix, the dynamic load sharing coefficient and the floating displacement of the sun gear are obtained according to the dynamic meshing force and damping load. Furthermore, the load sharing coefficient for external and internal meshing of the pitch drive for a 2 MW wind turbine with a three-stage planetary gear are achieved. Then, the floating displacement of the sun gear and the displacement of other gears are also obtained. Moreover, the influence of both external and internal meshing stiffness, the eccentric error and tooth frequency error for all components on the load sharing coefficient of all stages are investigated. Lastly, the theoretical components displacement of this model is compared with experiment results of the pitch drive under 50%, 100% and 150% rated torque in a test rig; the correctness of the model is verified by the experiment results.

Kinematics and Strength Analysis on Variable Propeller Pitch Mechanism of A Wind Turbine Generators

Strength Evaluation of the Composite Propeller under Hydrodynamic Fluid Load

Simulation of dynamical loads for large controllable pitch propellers ground tests

The Design, Analysis, and Optimization of a New Pitch Mechanism for Small Wind Turbines

STUDY ON BLADE PITCHING SYSTEM FOR HORIZONTAL AXIS TIDAL CURRENT TURBINE

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Modeling and Loading Compensation of A Rotary Valve-Controlled Pitch System for Wind Turbines

Study on Pitch Rate of Electro-Hydraulic Proportional Pitch-Controlled Wind Turbine

Design, Modeling and Implementation of a Novel Pitch Angle Control System for Wind Turbine

Structure Analysis of an Innovative Vertical Axis Wind Turbine with Inclined Pitch Axes Using Finite Element Method

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement

Adaptive Back-Stepping Pitch Angle Control For Wind Turbine Based On A New Electro-Hydraulic Pitch System

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

L1 Adaptive Pitch Angle Controller of Wind Energy Conversion Systems.

Dynamic Load Sharing Behavior for the Pitch Drive in MW Wind Turbines

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Collective Pitch for Horizontal Axis Marine Current Turbine

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

Structural Load Analysis of a Wind Turbine under Pitch Actuator and Controller Faults

Study on Variable Pitch Control of Pump Controlled Hydraulic System of Wind Turbine