Simulation of the Large Compressive Deformation of Metal Matrix Composites with Misaligned Whiskers

AB Li,L Geng,QY Meng,J Zhang

DOI: https://doi.org/10.1016/s0921-5093(03)00323-x

2003-01-01

Abstract:An embedded cell finite element model is used to analyze the effect of whisker orientation and rotation on the large compressive deformation of aluminum matrix composites reinforced by misaligned SiC whiskers. A large strain non-linear finite element code with updated Lagrangian formulation is used in this simulation. The composite material is regarded as a tilting whisker embedded in matrix and is again surrounded by a sufficient large homogeneous material with the overall mechanical behavior equivalent to the composite. The simulation provides the whisker rotation process and the evolution of stress–strain field during the large compressive loading. The numerical results show that the rotation angle of the whisker increase under the compressive loading, and the tilting whisker rotates toward the more stable position perpendicular to the compressive direction. It is also found that the whisker rotation angle decreases as the initial orientation angle of whisker increases. The effect of the initial whisker orientation is shown to be more sensitive to the stress–strain behavior of whiskers but less sensitive to the matrix during compression. Finally, the averaged stress–strain behavior of the composite material is quite sensitive to the initial orientation of whiskers.