Abstract:The anaerobic ammonium oxidation (anammox) process was successfully started up from conventional activated sludge using a hybrid bioreactor within 2 months. The average removal efficiencies of ammonia and nitrite were both over 80%, and the maximum total nitrogen removal rate of 1.85 kg N/(m3 x day) was obtained on day 362 with the initial sludge concentration of 0.7 g mixed liquor suspended solids (MLSS)/L. Scanning electron microscope (SEM) observation of the granular sludge in the hybrid reactor clearly showed a high degree of compactness and cell sphericity, and the cell size was quite uniform. Transmission electron microscope photos showed that cells were round or oval, the cellular diameter was 0.6-1.0 microm, and the percentage of the anammoxosome compartment was 51%-85% of the whole cell volume. Fluorescence in situ hybridization analysis (FISH) indicated that anammox bacteria became the dominant population in the community (accounting for more than 51% of total bacteria on day 250). Seven planctomycete 16S rRNA gene sequences were present in the 16S rRNA gene clone library generated from the biomass and affiliated to Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia sp., a new anammox species. In addition, the average effluent suspended solid (MLSS) concentrations of outlets I (above the non-woven carrier) and II (below the non-woven carrier) were 0.0009 and 0.0035 g/L, respectively. This showed that the non-woven carrier could catch the biomass effectively, which increased biomass and improved the nitrogen removal rate in the reactor.

Start-up of anaerobic ammonium oxidation process in sequencing batch reactor

Start-up of anammox under low substrate condition by using a sequencing batch biofilm reactor (SBBR)

Start-up of anammox in a sequencing batch biofilm reactor (SBBR)

Fast Start-Up of Anammox Process with Mixed Activated Sludge and Settling Option

Study on Start-Up of Anaerobic Ammonia Oxidation Reactors with Different Inocula

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

Biological Nitrogen Removal Via Anaerobic Ammonium Oxidation from Organic Wastewater in SBR

Studies on Start-Up Technique of Anammox Bioreactor

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Start-up of Anaerobic Ammonium Oxidation Reaction in UASB Bioreactor

Start-up Performance of Anaerobic Ammonia Oxidation Reactors Inoculated with Different Sludge

[Effect of Sequential Biocatalyst Addition on Anammox Process].

[Start-Up and Process Control of a Pilot-Scale Anammox Bioreactor at Ambient Temperature].

Nitrogen Removal from Sludge Dewatering Effluent Through Anaerobic Ammonia Oxidation Process.

Anammox start-up in sequencing batch biofilm reactors using different inoculating sludge

Start-Up of the Anammox Process from the Conventional Activated Sludge in A Hybrid Bioreactor

Start-up of Anaerobic Ammonia Oxidation Bioreactor with Nitrifying Activated Sludge.

START-UP ANAEROBIC AMMONIUM OXIDATION (ANAMMOX) PROCESS IN UASB-BIOFILM REACTOR

The start-up of dealing with reject water by ANAMMOX inoculatd with mixed sludge

Quick start-up of low-substrate Anammox ASBR reactor at normal temperature

Start-up characteristics of anaerobic ammonia oxidation (ANAMMOX) biological filter reactor