Abstract:The start-up of the anaerobic ammonium oxidation (anammox) process in three up-flow column reactors seeded with common mixed activated sludge and added with three materials, sponge (R1), sponge + volcanic rock (R2) and sponge + charcoal (R3), as carriers for biofilm formation were comparatively investigated in this study. The supplement of volcanic rock and charcoal could significantly shorten the start-up time of the anammox process, which primarily occurred in the activity-enhanced phase, with ammonium and nitrite removal efficiencies stabilized above 92.5% and 93.4% after an operation period of 145, 105 and 121 d for R1, R2 and R3, respectively. After the successful anammox start-up, R2 performed significantly better in TN removal (p < .05), achieving an average rate of 91.0% and 191.5 g N m-3 d-1 compared to R1 of 88.4% and 172.1 g N m-3 d-1, and R3 of 89.9% and 180.1 g N m-3 d-1 in the steady running phase. The ratios of consumed [Formula: see text] and generated [Formula: see text]/consumed [Formula: see text] after anammox start-up were lower than the theoretical values, probably suggesting the simultaneous existences of anammox, denitrification as well as nitrification processes in the reactors. A reddish brown biofilm was wrapped on the carriers and morphological detection of biofilm displayed the presentations of thick and compact floc aggregates and some filamentous bacteria on the sponge, and spherical-, ovoid- and shortrod-shaped microorganisms on the volcanic rock and charcoal. Using porous material as carrier for biofilm development is an effective strategy for practical application of the anammox reactor.

Start-up of Anaerobic Ammonia Oxidation Bioreactor with Nitrifying Activated Sludge.

Start-up of Anammox Bioreactor with Denitrification Biofilm

[Performance of ANAMMOX Attached Microbial Film Expanded Bed Reactor].

Performance of Anammox Granular Sludge Bed Reactor Started Up with Nitrifying Granular Sludge.

The Performance of Anammox Reactor During Start-Up: Enzymes Tell the Story

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Studies on Start-Up Technique of Anammox Bioreactor

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

[Start-Up and Process Control of a Pilot-Scale Anammox Bioreactor at Ambient Temperature].

[Performances of Anammox-Egsb Bioreactors Started Up with Three Different Seeding Sludges].

Nitrogen Removal from Sludge Dewatering Effluent Through Anaerobic Ammonia Oxidation Process.

Start-up Performance of Anaerobic Ammonia Oxidation Reactors Inoculated with Different Sludge

[Start-Up of a Full-Scale System for Short-Cut Nitrification and Anammox in Treatment of Pharmaceutical Wastewater].

Performance of Anammox Bioreactors Started Up with Different Seeding Sludges

[Effect of Sequential Biocatalyst Addition on Anammox Process].

Study on Start-Up and Running of ANAMMOX Reactor

Start-up of the combined anaerobic ammonium oxidation and solid phase denitrification process and microbial characterization analysis

Nitrogen Removal Characteristics and Comparison of the Microbial Community Structure in Different Anaerobic Ammonia Oxidation Reactors

[Study on the start-up of anaerobic ammonium oxidation process in biological activated carbon reactor].

Improvement of start-up and nitrogen removal of the anammox process in reactors inoculated with conventional activated sludge using biofilm carrier materials

Start-up of the Anammox process from the conventional activated sludge in a membrane bioreactor.