Abstract:The low-nitrogen combustion of natural gas has always been a crucial topic in environmental protection. Currently, small and medium-sized industries use straight-through pipelines as their burner nozzles. This design results in poor heat diffusion capacity after mixed combustion and a long time of temperature diffusion, leading to low combustion efficiency and high NOx emissions. To address this issue, a new type of natural gas lownitrogen burner with a multi-port diffusion nozzle was developed. The burner's structure was optimized through a combined approach of experiment and numerical simulation. The optimal structural parameters for the burner are a 40 degrees swirl angle and 8 swirl blades, as indicated by the numerical simulation research results. The designed multi-port diffusion nozzle is matched with the appropriate swirl angle and number of blades to promote natural gas diffusion, forming an annular space region flames and a stable flame shape with a height of 0.64 m. After optimization, the average concentration of NOx at the outlet of the combustion chamber decreased from 61.5 ppm to 20.81 ppm. A natural gas low-nitrogen combustion experimental system was designed and constructed based on simulation results. The experimental results were analyzed in terms of flame structure characteristics, temperature distribution, and NOx emissions. The results indicate that the trend in temperature change is consistent with the simulation process. The NOx concentration at the outlet of the combustion chamber was measured by the flue gas analyzer to be 34.1 ppm, which was 5.3 ppm lower than the NOx concentration calculated by numerical simulation. The new burner exhibited better flame stability and a 12.6 % reduction in NOx emissions compared with a traditional straight-through pipeline burner of the same size. The designed natural gas low-nitrogen burner appears to be a suitable device for reducing NOx emissions in small and mediumsized industries.

The Effect of the Air Rotation Momentum on the Gas Combustion Process and the Production of NOx

Numerical Studies of a Water-cooled Premixed Burner for Low NO x Combustion of Natural Gas

Numerical simulation of combustion distribution in a gas burner

Effect of Burner Structure Characteristics on Flameless Combustion of Non-Preheated Gas

Experiment and numerical study on combustion characteristics of low-nitrogen burners

Quantitative Analyses of No Formations from Different Reaction Pathways in Methane-Air Combustion at Various Pressures and Temperatures

NUMERICAL ANALYSIS OF HIGH TEMPERATURE COMBUSTION OF METHANE

Effect of Burner Structural Parameters on Combustion Characteristics and NOx Emission of Natural Gas

Numerical Study of the Combustion Process in the Vertical Heating Flue of Air Staging Coke Oven

A simulation study on effect of nozzle geometry on flameless combustion of non-preheated methane gas

On Mechanism And Optimization Of High Temperature/Low Oxygen Combustion

Combustion Characteristics of a Swirl Low-Nitrogen Burner with Multiple Gas Injection Pipes

Combustion Performance and NO Emission in Industrial Furnace under Preheated Air Condition with Different Excess Air Ratio

Research: influence of air classification ratio on low nitrogen performance of natural gas burner

Numerical Simulation of the Combustion Characteristics of a Low NOx Swirl Burner: Influence of the Primary Air Pipe

Influence of jet angle on diffusion combustion characteristics and NOx emissions in a self-reflux burner

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Effects of initial condition and fuel composition on laminar burning velocities of blast furnace gas with low heat value

INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF Nox

NO formation analysis of turbulent non-premixed coaxial methane/air diffusion flame