Abstract:Olivine LiFePO4 has been widely used as cathode material in lithium-ion batteries for electric vehicles (EV) due to high safety and long life. Its main drawback is low voltage plateau (3.5V). Recently, studies of LiMnPO4 have been paid more attention because it possesses the same structure and theoretical capacity as LiFePO4, but higher voltage plateau (4.1V). However, the poor conductivity limits its uses. Some modification methods such as ion-doping, carbon coating etc. have been investigated to improve its electrochemical properties, and the results in many papers indicated that LiMn1-xFexPO4/C (x=0.2~0.5) nano-particle composite cathode materials prepared by hydrothermal method can present promising electrochemical performance. For such method, how to use simple process to achieve LiMn1-xFexPO4/C nano-particles with high crystallization and dispersion is an important issue to be solved urgently at present. In this work, a simple and high effective hydrothermal preparation process for LiMn0.7Fe0.3PO4/C was proposed. In such process, the synthesis and carbon coating of LiMn0.7Fe0.3PO4 was completed in one-step. The structural and electrochemical properties of as-prepared materials were studied by using XRD, SEM, electrochemical impedance and charge-discharge tests technologies. The carbon sources and surfactant added in the process were optimized. The results show that when using CTAB as surfactant and glucose as carbon source, one-step process make LiMn0.7Fe0.3PO4/C obtain more uniform coated carbon, more controlled crystal particle growth and dispersion, more excellent electrochemical performance while compared with two-step process including hydrothermal synthesis followed by carbon-coating process. CTAB content exhibits little effect on crystal lattice parameters, structure and coated-carbon amounts of as-prepared materials. However, it displays great impact on the crystal particle size, carbon coating uniformity and particle dispersion. With gradual increase of CTAB content to 2.5g (in 40ml reaction liquid), as-prepared samples show an improved carbon coating uniformity, elevated Li+ diffusion coefficient, reduced electric charge transfer resistance, and remarkable enhanced capacity, rate capability and energy density. It presents a capacity of 143.5 mAh/g at 0.5C and 112.6 mAh/g at 5C, respectively. It is also noticeable that the sample exhibits an energy density of 499.3Wh/kg, 457.8Wh/kg and 349.7Wh/kg at 1C, 2C and 5C rate respectively. In addition, other surfactants that can also be used as carbon sources at the same time were also investigated, and it is found that some surfactant can substitute for CTAB+glucose to further simplify process and lower cost.

Synthesis of Sub-Micrometer Lithium Iron Phosphate Particles Using Supercritical Hydrothermal Method for Lithium Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Study on the Preparation of Lifepo4 by Hydrothermal Method

Enhanced electrochemical performance of FeS 2 synthesized by hydrothermal method for lithium ion batteries

N-methyl-2-pyrrolidone-assisted solvothermal synthesis of nanosize orthorhombic lithium iron phosphate with improved Li-storage performance

Morphology and Reaction Mechanism of LiFePO4 Prepared by Hydrothermal Synthesis

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Simple Hydrothermal Preparation of High Performance LiMn0.7Fe0.3PO4/C Nano-Particle Cathode Materials

Fe3O4 Submicron Spheroids As Anode Materials for Lithium-Ion Batteries with Stable and High Electrochemical Performance

Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

Concentration-Controlled and Phytic Acid-Assisted Synthesis of Self-Assembled LiFePO4 As Cathode Materials for Lithium-Ion Battery

Hydrothermal Synthesis of Ultra-Thin LiFePO4 Platelets for Li-ion Batteries

Controllable Synthesis of Regular Lifepo4 Particles Via Solvothermal Reaction

An inexpensive preparation of unique nano-micro porous LiFePO4 cathode with excellent rate capability for lithium-ion batteries